Thetford Porta Potti 335 - Hold Down Kit

No, this specific hold down kit is designed only for the Thetford Porta Potti 335. Please check compatibility for other models separately.

This kit is designed for solid, flat surfaces such as wood, laminate, or sealed flooring found in RVs, boats, or utility sheds. Ensure the floor can support secure screw or bolt fixings.

Basic tools such as a screwdriver or drill (depending on the floor type and fixings used) are typically required. These tools are not usually included in the kit.

Installation time can vary but is generally straightforward and can often be completed within 30-60 minutes with basic DIY skills.

The hold-down kit is designed for semi-permanent fixing. While it can be uninstalled, it's intended for situations where the toilet will remain in place for extended periods.

The kit includes components for attaching the toilet to the hold-down base. However, the actual screws or bolts to fix the base to your specific floor surface may need to be sourced separately to match your floor material.

Ensure all screws or bolts securing the hold-down kit to the floor are tightened firmly. Check that the floor surface is even and stable. Re-verify the compatibility with your specific Porta Potti 335 model.

Double-check that the Porta Potti 335 is correctly positioned. Ensure you are using the correct orientation of the hold-down plate as per the installation diagram (if provided). Sometimes slight adjustments to the toilet's position are needed before marking.

The floor material may not be suitable for the provided fixings. Ensure you are using fixings appropriate for your floor type (e.g., wood screws for timber, masonry anchors for concrete). If the floor is soft, consider using larger washers or backing plates.