Hozelock Auto Off Controller - Multicolor

You can manually set the watering duration for periods up to 120 minutes (2 hours) using the mechanical dial.

No, the Hozelock Auto Off Controller is a purely mechanical device and does not require any batteries.

Yes, it is compatible with low-pressure micro-irrigation systems operating at 1.5 bar.

The controller can handle water pressures up to 10 bar, making it suitable for standard garden sprinklers.

To stop watering immediately, turn the dial fully counter-clockwise to the 'OFF' position.

Yes, it can be useful for filling ponds or paddling pools to a predetermined time, helping to avoid overfilling and water wastage.

Minimal maintenance is required. Periodically clean the inlet filter if it becomes clogged with debris. Store it dry during freezing weather.

Ensure the tap is fully turned on and the controller's dial is set to a duration greater than zero. Check for any blockages in the tap connection or the controller's inlet.

The mechanical mechanism may be obstructed. Try gently turning the dial back and forth. If the issue persists, the internal mechanism may require servicing or replacement.

Check the tap is fully open. Clean any debris from the tap washer and the controller's inlet filter. Ensure the hose or connected system is not kinked.

Ensure the controller is properly screwed onto the tap and is not cross-threaded. If stiff, try turning it while water is briefly running (then turn tap off before final setting) to dislodge any minor debris.