Sealey Dust Blower - VS226

The VS226 is powered by the rotation of a standard electric drill. It does not have its own motor.

Yes, it is compatible with most standard electric drills. Ensure your drill has a chuck that can securely hold the VS226 pipe.

It is suitable for a universal range of materials, including solid and perforated substrates like metal, wood, and plastics.

Thoroughly clean out all drill dust and debris from the hole using the VS226 before applying adhesives, sealants, or inserting screws and bolts.

The VS226 features an extended blow pipe designed to reach into hard-to-access areas.

Wipe the pipe and nozzle clean with a dry or slightly damp cloth to remove any dust or debris. Ensure it is dry before storing.

The VS226 is designed for dry dust removal. It is not intended for use with wet drilling or slurry.

Ensure the drill is rotating in the correct direction (forward). Check that the VS226 pipe is securely attached to the drill chuck. Verify that the nozzle is fully inserted into the hole and that there are no blockages within the pipe.

Increase the drill speed if safe to do so. Ensure a good seal between the VS226 nozzle and the hole. Check for any leaks where the pipe connects to the drill.

Try a lower drill speed initially to agitate larger debris, then increase speed to clear. For very deep holes, consider using a vacuum attachment in conjunction with the blower if possible.