Shower Seal Uk Ltd Clear Shower Seal For Screens, Doors Or Panels - 25Mm Sample
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Seal057 clear shower seal by SHOWER SEAL UK LTD is designed for homeowners and contractors looking to replace worn-out door or screen seals on glass panels ranging from 8mm to 10mm in thickness. Its primary benefit is the 15mm rigid arched deflector fin, which is engineered to manage water runoff in tight spaces where standard seals fail to fit; however, users should measure their glass thickness precisely, as this model is specifically calibrated for 8-10mm profiles.
All features
| Model Part Number | Seal057 |
|---|---|
| Brand | SHOWER SEAL UK LTD |
Extended Product Information
FAQs
Can I use this on 6mm glass?
No, this specific model (Seal057) is designed specifically for 8mm, 9mm, and 10mm glass.
How do I cut the seal to size?
You can trim the plastic profile easily using a fine-tooth saw or a pair of heavy-duty utility snips.
Does this seal work on curved glass?
This seal is rigid and designed for straight glass panels; it may not conform properly to curved or radius glass.
Is the seal adhesive-backed?
No, it is a friction-fit seal that clamps onto the glass edge.
How long will the seal last before needing replacement?
Lifespan depends on water hardness and usage, but generally, these seals last 1-2 years before showing signs of yellowing or wear.
Can I use this for a steam enclosure?
This seal is intended for water splash deflection and is not rated as an airtight seal for steam containment.
Troubleshooting
Seal is too difficult to push onto the glass.
Apply a tiny amount of liquid dish soap to the glass edge to reduce friction during installation.
Seal keeps sliding off the glass.
Ensure the glass is dry and free of residue before installation, or check that your glass is not thinner than 8mm.
Water is still leaking under the door.
Check that the arched fin is directed toward the inside of the shower and that the seal is fully seated along the entire length.
Pros and Cons
Pros
- Fits multiple glass thicknesses (8mm-10mm)
- Rigid fin design provides superior water deflection
- Suitable for very tight gaps
- Clean, transparent appearance maintains bathroom aesthetics
- Can be used in both vertical and horizontal configurations
Cons
- Requires precise measurement of glass thickness
- Not suitable for glass thinner than 8mm
- Rigid fin may require precise alignment to avoid binding
Setup, Compatibility & Care
To install, first remove the old, degraded seal and clean the bottom edge of the glass thoroughly with a non-abrasive cleaner to remove soap scum or limescale. Measure the required length and cut the new seal using a fine-tooth hacksaw or heavy-duty shears.
Push the seal onto the glass edge firmly. If the seal feels too tight, a small amount of warm water or a light soapy solution can act as a lubricant to help it slide onto the glass. For care, avoid using harsh chemicals or bleach on the seal, as these can cause the clear material to yellow or become brittle over time. Regular rinsing with fresh water and wiping with a soft cloth will extend its lifespan.