Elite Replacement Stingray 10 Impeller - A147
Best current price£6.10from VioVet
Best offers
Shopping.co.uk recommended and popular offers
VioVet£6.10Visit shop Hagen Stingray Impeller - One Size 10
Visit shopVioVet£6.10Visit shop All Offers
2 offers from £6.10 - £6.79
View price history by clicking the chart icon.
Product Information
Full details
The Elite Replacement Stingray 10 Impeller is designed for aquarium hobbyists who own an Elite Stingray 10 Internal Filter and need to restore optimal water flow and filtration efficiency. This genuine replacement part is essential for maintaining a healthy aquatic environment, though it is exclusively compatible with the A142 filter model and requires careful handling during installation to avoid damaging the delicate magnet or shaft.
All features
| Model Part Number | 10 |
|---|---|
| Brand | Hagen |
Extended Product Information
FAQs
Is this compatible with Stingray 15 filters?
No, this part is specifically designed for the Stingray 10 (model A142) and is not compatible with larger models.
How often should I replace the impeller?
There is no set schedule, but it should be replaced whenever you notice a permanent drop in performance or an increase in operational noise.
Do I need any tools to install this?
No, the impeller is designed to be removed and installed by hand without the need for specialized tools.
Can I use this impeller in saltwater tanks?
Yes, it is constructed from materials suitable for both freshwater and saltwater aquarium environments.
Why does the impeller rattle right after installation?
Ensure that the impeller is centered on the shaft and that the filter housing cover is clicked firmly into place.
Troubleshooting
Filter is making a loud rattling noise
The impeller may be misaligned or debris is stuck inside the housing. Remove, clean, and reseat the impeller.
Water flow is very weak
Check if the impeller blades are damaged or if there is excessive algae buildup on the magnet preventing smooth rotation.
Filter will not start after replacement
Ensure the impeller shaft is not broken and the impeller is fully seated into the motor block.
Pros and Cons
Pros
- Ensures original equipment performance standards
- Easy to install without special tools
- Restores quiet operation to noisy filters
- Maintains proper filtration cycles for tank health
Cons
- Compatible only with the Stingray 10 (A142) filter
- Small parts can be fragile if mishandled
- Requires regular maintenance to prevent premature wear
Setup, Compatibility & Care
To install, first unplug your filter from the power source and remove it from the tank. Carefully pull the impeller cover off to expose the existing unit. Gently slide the old impeller out of the motor block, taking care not to lose any internal spacers or gaskets. Insert the new A147 impeller, ensuring it seats firmly onto the shaft. For long-term care, perform an impeller inspection during your monthly filter media cleaning; rinse it under tap water to remove biofilm or debris buildup, which can cause the motor to strain or overheat. Never run the filter dry, as this can melt the impeller housing and damage the motor head.