Best current price£27.99from eBay
Shopping.co.uk recommended and popular offers
eBay£27.99Visit shop 6 Cylinder Diesel Common Rail Injector Flow Meter Adaptor Leak Off Tester
Visit shop2 offers from £27.99
View price history by clicking the chart icon.
This guide is for mechanics and technicians working with Common Rail diesel engines. The Neilsen CT3756 Diesel Injector Flow Meter allows you to accurately measure the return flow of diesel injectors, helping to diagnose injector issues. A key benefit is the ability to quickly identify damaged injectors, saving time and potentially preventing engine damage. Note that proper understanding of diesel engine systems is required for effective use.
| Model Part Number | CT3756 |
|---|---|
| Brand | Neilsen |
This flow meter is compatible with Bosch, Delphi, Denso, and Siemens Common Rail diesel systems.
Clean the bottles and hoses with a suitable solvent after each use. Ensure that all components are dry before storing.
The reservoir bottles have a capacity of 105ml.
The fuel-resistant hoses are 650mm long.
Check for leaks, ensure all connections are secure, and verify that the engine is running at the correct idle speed. Also, check that the fuel is at the correct temperature.
No, this flow meter is designed specifically for Common Rail diesel injectors. Check compatibility with your injector type before use.
Replace the damaged hoses immediately to prevent fuel leaks and ensure accurate measurements.
The manometer tubes help you to get more precise measurements of the return flow of the injectors. The higher the flow, the more likely there is an injector issue.
Check all connections for leaks. Ensure the hoses are properly connected and that the bottles are level. Verify that the fuel is at the correct temperature. Also, calibrate the device before each use.
Inspect the hoses and connections for damage. Replace any damaged hoses. Ensure all connections are secure and properly seated. Check the condition of the adapters.
Reduce engine idle time. Check for very high return flow from a faulty injector. Empty the bottles when they reach capacity. Ensure that the bottles are not overfilled.
Use the appropriate adapters for your injector type. Ensure the connections are clean and free of debris. Apply a small amount of lubricant to the connections if needed. If necessary, consult the injector manufacturer's specifications.
The Diesel Injector Flow Meter is compatible with Bosch, Delphi, Denso, and Siemens Common Rail diesel systems. Ensure compatibility by checking the injector type and any required adapters.
