Best current price£157.57from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£157.57Visit shop Sam Mouldings Grey/White Double Shiplap Mdf Cladding - 244Mm X 4.88Mtr
Visit shop2 offers from £157.57
View price history by clicking the chart icon.
The Double Shiplap MDF Cladding by SAM Mouldings is an ideal solution for homeowners and professionals seeking a high-quality, pre-finished interior wall covering that mimics the aesthetic of traditional timber shiplap. This 244mm wide and 4.88-meter long cladding provides a durable, smooth surface that elevates interior aesthetics with minimal effort; however, it is specifically engineered for interior use and should not be exposed to direct outdoor weather conditions.
| Model Part Number | SAM004-064201 |
|---|---|
| Brand | SAM Mouldings |
The cladding comes fully finished in Grey White, but if you wish to change the color, you can lightly sand the surface and apply a suitable primer followed by top-quality interior paint.
No, this product is made of MDF and is intended for dry interior rooms only. It should not be used in bathrooms or wet rooms.
The best results are achieved by using a combination of construction adhesive and discrete pin nails hidden within the shiplap profile.
You will need a tape measure, spirit level, miter saw or circular saw, a nail gun or hammer/nails, and high-quality construction adhesive.
While MDF is sturdy, these boards are 4.88 meters long, making them unwieldy. It is highly recommended to have two people handle the boards during installation.
Store boards flat in a climate-controlled room off the floor to allow them to flatten out before fitting.
Ensure the underlying wall is perfectly plumb and that each tongue-and-groove joint is fully seated before fastening.
Use painter's tape over the cut line before sawing to maintain a clean edge, or use a finer tooth blade.
Installation should be performed on a clean, dry, and flat substrate, such as existing drywall or a timber batten framework. It is recommended to allow the boards to acclimate to the room temperature for 24 hours before fixing. Use high-quality construction adhesive combined with pin nails for the most secure hold. When cutting the MDF, ensure you use a fine-tooth blade to prevent splintering the finish. For care, simply wipe the surface with a soft, dry cloth; if marks occur, a lightly dampened microfiber cloth is sufficient. Avoid using harsh chemical cleaners or abrasive scouring pads, as these can compromise the pre-finished layer.
