Tear-Aid Type A Repair Patch - 75mm x 900mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone needing a quick and effective solution for repairing tears and holes in various fabrics. The Tear-Aid Type A patch provides a strong, self-adhesive repair, ideal for tents, awnings, and other outdoor gear. However, it's essential to clean the surface thoroughly before application for optimal adhesion.
All features
| Brand | Tear-Aid |
|---|
Extended Product Information
FAQs
What materials can I use Tear-Aid Type A on?
Tear-Aid Type A is ideal for tents, awnings, kites, boats, and sailing fabrics.
How do I remove the patch?
Tear-Aid is designed to be permanent. Removal may damage the fabric.
Can I wash the repaired item?
Yes, but wait at least 24 hours after application before washing.
Is Tear-Aid Type A waterproof?
Yes, it provides a waterproof seal.
How long will the repair last?
The repair should last for a long time, provided the patch is applied correctly and the fabric is properly maintained.
Can I cut the patch to fit?
Yes, cut the patch to the desired size, ensuring it's larger than the damaged area.
Troubleshooting
Patch is not sticking properly.
Ensure the surface is completely clean and dry before applying the patch. Apply firm pressure and remove any air bubbles.
Patch is peeling off.
Make sure the patch size is adequate and overlaps the damaged area sufficiently. Consider using a heat source (like a hairdryer) briefly to improve adhesion.
Pros and Cons
Pros
- Easy to apply, saving time and effort.
- Creates a strong, reliable seal.
- Weather-resistant, suitable for outdoor use.
- Flexible and adapts to the material.
Cons
- Requires proper surface preparation for optimal adhesion.
- May not be suitable for all types of materials (check compatibility).
- Appearance may be noticeable depending on the color of the patch and the repaired item.
Setup, Compatibility & Care
- Preparation: Clean the damaged area thoroughly with rubbing alcohol and let it dry completely.
- Cutting: Cut the Tear-Aid patch to the required size, making sure it overlaps the damaged area by at least 1 inch on all sides.
- Application: Remove the backing and carefully apply the patch to the damaged area, avoiding air bubbles. Use a smooth tool like a credit card to get rid of any air bubbles.
- Compatibility: Tear-Aid Type A is designed for use on tents, awnings, kites, boats, and sailing fabrics. Always test on a small, inconspicuous area first.
- Care: Avoid washing the repaired item for at least 24 hours after application to allow the adhesive to fully bond. Clean with mild soap and water.