Best current price£43.49from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£43.49Visit shop Loops 500Mm Led Drawer Strip Light Auto On/Off Pir Sensor Kitchen Cupboard Door Unit
Visit shop
B&Q£44.49Visit shop - 500mm Led Drawer Strip Light With Pir Sensor For Kitchen Cupboards And Drawers
Visit shop3 offers from £43.49 - £46.71
View price history by clicking the chart icon.
The Loops 500mm LED Drawer Strip Light is designed for homeowners looking to enhance kitchen functionality and visibility. Its key benefit is the automatic illumination of drawers and cupboards via an advanced PIR motion sensor, eliminating the need to search in the dark. A potential caveat is the need for professional installation due to its low-voltage wiring requirements.
| Brand | Loops |
|---|
The LED lights have an extended lifespan of approximately 30,000 hours.
No, these lights have an IP20 rating, meaning they are not protected against water or moisture and are intended for dry indoor environments only.
The included 8W driver is designed to power the 3.5W lights. It can safely power up to two lights from a single driver.
The light color appearance is Natural White, with a color temperature ranging from 3500 to 4000 Kelvin.
While the lights are designed for surface mounting, they require low-voltage electrical connections. Professional installation is recommended to ensure safety and correct setup.
The total width of the fitting, including the sensor, is 500mm. The width of the LED light strip itself is 460mm.
The Color Rendering Index (CRI) is Ra 83, which indicates good color accuracy.
Verify that the 12V DC power supply is connected and functional. Check all wire connections to the light and the driver. Ensure the PIR sensor is correctly positioned to detect motion and is not obstructed.
Confirm that the drawer or cupboard is fully closed, ensuring no obstruction for the sensor. Check for any potential interference or incorrect sensor placement. The timer function may need a reset by momentarily disconnecting power.
Inspect all electrical connections for looseness or damage. Ensure the 12V DC power supply is stable and providing adequate voltage. The light strip itself may be faulty if the issue persists after checking connections and power.
Ensure the PIR sensor is not being triggered by external factors like vibration or drafts. Obstructions near the sensor or a failing sensor may also cause this. Re-position the sensor if necessary.
Setup: These lights are designed for surface mounting. Secure each light fixture to the underside of the top panel inside your cupboard or drawer. Ensure the sensor is positioned to detect the opening and closing motion. Connect the lights to the included 12V DC, 8W driver, and connect the driver to your 12V DC power source. *Professional installation is recommended due to electrical connections.*
Compatibility: The system operates on 12V DC. Ensure your power source meets this requirement. The included driver is rated for 8W, and each light consumes 3.5W, making it suitable for up to two lights from one driver. It is compatible with standard cupboard and drawer constructions.
Care: Clean the light casing and sensor with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and components. Ensure the unit is disconnected from the power source before cleaning. The IP20 rating means it should not be exposed to water or excessive moisture.
