Ryobi Detail Polisher / Sander - 18V

The Ryobi Detail Polisher/Sander is best suited for automotive detailing, marine applications, and woodworking projects, particularly for removing scratches and applying finishes.

No, this is a bare tool, meaning the battery and charger are not included. It is part of the Ryobi 18V ONE+™ system.

The tool is designed to work with various polishing pads and bonnets suitable for polishing, sanding, and waxing.

The polisher has a two-speed switch. You can select the appropriate speed (I or II) depending on the task.

After each use, wipe the polisher with a clean cloth. Store the tool in a clean and dry place, and always remove the battery before storing or performing maintenance.

Check the battery connection and charge, ensure the switch is fully engaged, check and replace the polishing pad or bonnet if needed.

Check the battery connection and ensure the battery is charged. If the battery is connected correctly and charged, make sure the switch is fully engaged.

Ensure the battery is fully charged. Clean or replace the polishing pad or bonnet if necessary. Adjust the pressure applied to the surface to prevent stalling.

Make sure the pad is correctly attached and balanced. Check for any damage or wear on the pad and replace it if needed.