Best current price£9.09from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£9.09Visit shop 3 Pin Xlr Male To 5 Pin Xlr Female Dmx Adapter Lighting Audio Barrel Converter 5055538102714
Visit shop
B&Q£10.69Visit shop - 3 Pin Xlr Male To 5 Pin Xlr Female Dmx Adapter Lighting Audio Barrel Converter
Visit shop3 offers from £9.09 - £10.69
View price history by clicking the chart icon.
This Loops adapter is for lighting technicians and audio engineers needing to bridge DMX signal differences between 3-pin male and 5-pin female DMX equipment. Its key benefit is enabling seamless connectivity between disparate DMX systems, though users should be aware that not all 5-pin DMX features may be supported over this specific adapter's wiring.
| Brand | Loops |
|---|
This adapter allows you to connect DMX equipment with a 3-pin XLR male connector to cables or devices that use a 5-pin XLR female connector, enabling interoperability between different DMX standards.
No, this adapter is a passive connector that bridges the physical difference between 3-pin and 5-pin XLR connectors. It does not convert or alter the DMX signal itself.
While XLR connectors are used for both, this adapter is specifically designed for DMX512 digital communication signals used in lighting control. It is not intended for standard analog audio signals.
Standard DMX512 uses pins 2 and 3 for signal transmission. The 5-pin XLR connector also has pins 4 and 5, which can be used for secondary communication or other purposes depending on the equipment manufacturer. This adapter passes those connections through.
The connectors on this adapter are nickel-plated for durability and reliable signal transmission.
No, this is a 3-pin male to 5-pin female adapter. You would need a different adapter for that specific connection.
Use a clean, dry, lint-free cloth to gently wipe the connector pins. Avoid using liquids or abrasive materials that could damage the plating or impede conductivity.
Verify that the 3-pin DMX source is active and sending a signal. Ensure the adapter is securely connected at both ends. Check that the DMX address settings on both the source and destination devices are correctly configured.
Inspect the adapter's connectors for any dirt or damage. Ensure the cable connections are firm. Try using a different DMX cable to rule out cable issues. Test with a direct connection (if possible) to confirm the adapter is the point of failure.
This adapter primarily bridges the physical connector. Advanced features relying on specific pin configurations beyond standard DMX may not be fully supported. Consult the manuals for both your DMX source and destination devices.
Setup: Simply plug the 3-pin male end into the DMX output of your source device (e.g., lighting console) and connect your 5-pin DMX female cable to the 5-pin female end of the adapter. Ensure all connections are secure.
Compatibility: This adapter is designed for standard DMX512 communication. It bridges the physical connector difference between 3-pin XLR (male) and 5-pin XLR (female). It is compatible with most DMX lighting and audio control systems. However, ensure your DMX source and destination devices are correctly configured for DMX operation.
Care: Store the adapter in a clean, dry place when not in use. Avoid exposing it to excessive moisture, extreme temperatures, or physical damage. Clean connectors periodically with a dry, lint-free cloth to maintain optimal conductivity. Do not use abrasive cleaners.
