Best current price£25.02from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£25.02Visit shop Powertec 2Pk Toggle Clamp 500 Lbs Holding Capacity 12130 Quick Release Vertical Clamps Wantislip Rubber Pressure Tip For Wood 843441101079
Visit shop1 offer from £25.02
View price history by clicking the chart icon.
This guide is for woodworkers and DIY enthusiasts looking to enhance their jigs and fixtures with secure workholding. The POWERTEC Toggle Clamp provides a dependable vertical hold-down action, securing workpieces with up to 500 lbs of force. A key consideration is ensuring compatibility with your specific T-track system, as it requires T-tracks that accept 1/4” hex head bolts and 5/16" t-bolts.
| Model Part Number | 20335 |
|---|---|
| Brand | POWERTEC |
Each POWERTEC Toggle Clamp in this package can hold up to 500 lbs.
These clamps require T-tracks that can accept 1/4” hex head bolts and 5/16" t-bolts. They are compatible with the POWERTEC 71416 Toggle Clamp Mounting Plate and POWERTEC T Track.
The clamps are constructed from heavy-duty cold-rolled carbon steel.
No, mounting hardware for the flanged base is not included and should be selected based on your specific mounting surface.
These are specifically designed as vertical handle toggle clamps for vertical hold-down action.
The clamp's position is adjusted by loosening the mounting fasteners and repositioning the base. The linkage itself is fixed for vertical action.
Clean pivot points and apply a light lubricant. Check for any debris obstructing movement.
Verify that the workpiece is positioned correctly and that the clamp is fully engaged. Ensure the holding surface is flat and stable. Check if the 500 lbs capacity is being exceeded.
Confirm that your T-track system specifically accepts 1/4” hex head bolts and 5/16" t-bolts, as required for compatibility. You may need to use a different mounting plate or adapt the setup.
Setup: To install, position the clamp on your jig or workbench where vertical hold-down is needed. Secure the flanged base to the surface using appropriate fasteners (not included) through the mounting holes. Ensure the T-track compatibility is met by using T-tracks that accept 1/4” hex head bolts and 5/16" t-bolts for any T-track mounting.
Compatibility: These clamps are designed for use with T-tracks that accommodate 1/4” hex head bolts and 5/16" t-bolts. They are compatible with the POWERTEC 71416 Toggle Clamp Mounting Plate and POWERTEC T Track systems.
Care: Keep the clamp clean and free of sawdust or debris. A light application of lubricant on the pivot points may be beneficial for smooth operation over time. Wipe down with a dry or slightly damp cloth as needed. Avoid harsh chemicals that could damage the vinyl grip or metal finish.
