Best current price£5.90from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.90Visit shop B&Q - Pipe Polysulfone (Psu) Tank Coupler White X ¾" (D)60mm X (L)50mmPack Of 1
Visit shop1 offer from £5.90
View price history by clicking the chart icon.
The Flomasta White Reducing Pipe Tank Coupler is designed for DIY and professional plumbers working with plumbing and heating systems. Its key benefit is providing hassle-free, secure joints thanks to a unique connection indicator. A potential consideration is its specific size (Dia 60mm - L 50mm - ¾"), which requires compatibility with existing pipework. This pack contains one coupler, essential for reducing pipe sizes in various water systems.
| Brand | Flomasta |
|---|
This coupler is suitable for general plumbing and heating systems. It is not designed for gas lines or high-pressure industrial use.
The coupler features a secure connection indicator that provides a visual cue when the joint has been made correctly and safely.
The coupler has a diameter of 60mm on one end, a length of 50mm, and a ¾" connection on the reduced end.
No, this coupler is specifically designed to reduce from a 60mm pipe to a fitting requiring a ¾" connection. Ensure your existing pipes match these specifications.
Each pack contains one Flomasta White Reducing Pipe Tank Coupler.
While specific pipe systems might require tools for joining (e.g., crimpers, wrenches), the coupler itself is designed for straightforward fitting, but always follow the installation guidelines for your specific pipe material.
Ensure the pipe ends are clean, free of debris, and cut to the correct diameter. Verify you are using the correct pipe sizes (60mm and ¾").
Check that the pipe is fully inserted into the coupler and that the joint is tightened or secured according to the specific pipe system's requirements. Re-read installation instructions for the pipe type being used.
Turn off the water supply. Carefully re-examine the joint for any obstructions or improper seating. Re-seat the coupler and ensure a secure connection is made. If the issue persists, the coupler may be faulty or incompatible with the pipe material.
To set up the Flomasta White Reducing Pipe Tank Coupler, ensure your existing pipework matches the specified dimensions: Dia 60mm for the larger end and a requirement for a ¾" connection at the reduced end. Clean both pipe ends thoroughly before attempting to join them. Slide the coupler onto the larger pipe first, ensuring it is fully seated. Then, connect the ¾" pipe, ensuring a firm and secure fit. The built-in connection indicator will confirm when the joint is properly made. Compatibility is key; this coupler is designed for standard plumbing and heating systems and is not intended for use with gas lines or high-pressure industrial applications. Care is minimal; the coupler requires no special maintenance. Wipe clean with a damp cloth if necessary, avoiding abrasive cleaners. Inspect periodically for any signs of wear or damage, especially in older systems.
