A Street Prints Wallpaper - Pink

Please refer to the product packaging or manufacturer's website for the specific pattern repeat measurement, as this is crucial for accurate wallpaper calculation and application.

Measure the width and height of your walls, then calculate the total square footage. Divide this by the square footage covered by one roll (typically found on the packaging), accounting for the pattern repeat to avoid waste.

While it can be used in a kitchen, it is not recommended for bathrooms due to potential high moisture levels. For wet areas, a vinyl or specialized bathroom wallpaper is generally more suitable.

Most wallpapers can be removed by starting at a seam and peeling it away. If it's difficult, a wallpaper steamer or a solution of warm water and fabric softener can help loosen the adhesive.

The Peach colourway is designed to be a soft, gentle hue. However, screen calibrations vary, so the actual color may appear slightly different. Ordering a sample is recommended for accuracy.

Essential tools include a wallpaper adhesive, a pasting table, a sharp utility knife or blade, a straight edge or level, a wallpaper brush or smoother, and a seam roller.

Immediately lift the wallpaper and smooth it out with a wallpaper brush or a clean, damp cloth, working from the center outwards. Ensure the adhesive is evenly applied.

Ensure the wallpaper is cut precisely and allow adequate 'booking time' for the adhesive to activate if required by the manufacturer. Overlap edges slightly if recommended, or use a seam roller gently.

Check if the correct type of adhesive was used and if the wall surface was adequately prepared. Reapply adhesive to both the wall and the back of the wallpaper if necessary.

Variations can occur due to lighting. Ensure consistent lighting during installation and view the wallpaper in natural daylight after it has fully dried. Check that you are using rolls from the same batch number.