Best current price£115.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£115.00Visit shop B&Q - Universal Press And Pull Bearing Bush Sleeve Kit Remover Installer 26Pcs Bergen
Visit shop2 offers from £115.00
View price history by clicking the chart icon.
This comprehensive 26-piece kit from AB Tools is designed for professionals and serious DIYers tackling bearing and seal replacement on cars, LCV, and HGV vehicles. Its key benefit is the universal application for extracting and installing various types of bearings and bushes, simplifying complex tasks. A potential caveat is the requirement for a separate workshop press for certain applications, and users must select the correct sleeve size to avoid damage. The kit includes multiple pulling spindles and a wide range of press sleeves to accommodate diverse sizes.
| Model Part Number | AT920 |
|---|---|
| Brand | AB Tools |
The kit is designed for extracting and installing silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals, and rubber bearings.
While the kit can be used individually for some tasks, a workshop press of suitable size is recommended for heavier-duty applications to ensure safe and effective operation.
Choose a sleeve whose outer diameter fits snugly against the bearing or seal's outer edge, and whose inner diameter is large enough to allow the component to pass through or be supported without damage. The sleeve should distribute pressure evenly.
The 20 press sleeves have inside diameters ranging from 34mm to 72mm and outside diameters ranging from 44mm to 82mm, in 2mm diameter steps.
All four M-thread pulling spindles (M10, M12, M14, M16) have a total length of 450mm, including nuts and thrust bearings.
Clean components after use, lightly oil the pulling spindles to prevent rust, and store everything in the provided blow-molded case.
It is suitable for all cars, LCV (Light Commercial Vehicles), and HGV (Heavy Goods Vehicles).
Clean the spindle threads and the corresponding nut. Apply a small amount of lubricant to the threads.
Double-check the inside and outside diameters of the press sleeves against the dimensions of the bearing and housing. Select the closest matching size that provides adequate support without interfering with the component.
Ensure the component is being pressed straight. If resistance is too high, consider using a workshop press. Verify that no obstructions are present and the correct sleeve size is being used.
Clean the thrust bearing and apply a light machine oil or grease. Ensure no debris is caught in the bearing mechanism.
Setup:
Compatibility:
Care:
