DT Swiss HX 1501 SPLINE 29 spoke replacement kit

Best current price£22.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop DT Swiss Spoke Replacement Kit - HX 1501 29-inch
Visit shop
Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop DT Swiss Spoke Replacement Kit - HX 1501 29-inch
Visit shop1 offer from £22.99
View price history by clicking the chart icon.
This DT Swiss spoke replacement kit is designed for owners of DT Hybrid HX 1501 SPLINE 29 wheels who need to replace damaged or worn spokes. Its key benefit is providing the exact, non-standard spokes and necessary hardware for a precise repair. A potential caveat is that repairs on wheels less than two years old may void the warranty if not performed by an authorized DT service center.
| Model Part Number | DTSPPK023 |
|---|---|
| Brand | DT Swiss |
This kit is specifically designed for DT Swiss HX 1501 SPLINE 29 wheels featuring the oversize 2.3 mm spoke interface.
The kit includes two spokes of each required length for the wheel, plus replacement nipples and washers where relevant.
No, these spokes are custom-sized for the HX 1501 SPLINE 29 model and its unique 2.3 mm interface. Using them on other wheels will not work and could damage the wheel.
You need this kit if one or more spokes on your DT Swiss HX 1501 SPLINE 29 wheel are broken, bent, or significantly worn.
While possible with the right tools and knowledge, DT Swiss recommends that repairs on wheels less than two years old be performed by an authorized service center to avoid voiding the warranty.
You will typically need a spoke wrench, a nipple driver, and ideally a spoke tension meter for accurate tensioning.
When installed correctly with proper tension, these genuine DT Swiss spokes should offer a similar lifespan to the original spokes.
Check the tension of all spokes, especially those around the replaced spoke. Use a spoke tension meter to ensure even tension across the wheel. Adjust nipples as needed to true the wheel.
Confirm you are using the correct length spoke from the kit for that specific location on the wheel. Ensure the spoke nipple and washer (if applicable) are correctly positioned.
If the spoke is severely damaged, carefully cut it with a spoke cutter or hacksaw. If it's stuck at the nipple, try applying a penetrating lubricant and using a spoke wrench.
Compatibility: This kit is exclusively for DT Swiss HX 1501 SPLINE 29 wheels that utilize the oversize 2.3 mm spoke interface. Verify your wheel model before purchase.
Setup: Replacing spokes requires specialized tools such as a spoke wrench, nipple driver, and potentially a spoke tension meter. It is crucial to ensure all new spokes are installed with the correct tension to maintain wheel true and prevent premature failure. For wheels under two years old, DT Swiss strongly recommends having repairs performed by a local DT service center to avoid voiding the warranty.
Care: While the kit contains replacement parts, ongoing care of your wheels involves regular cleaning and inspection. Keep spokes clean and check for any signs of damage or corrosion. Ensure nipples remain tight and properly seated.