Bonda Wood Fill Two Part Filler - Black - Ebony 500G

The working time depends on the temperature, but it is designed to be rapid-hardening. Always refer to the product packaging for specific working times.

While Bonda Woodfill provides a durable repair, its suitability for exterior use depends on the finishing applied over it. A good quality exterior paint or varnish should provide adequate protection.

The 'Black - Ebony' color is a dark shade. For precise matching on lighter woods, you may need to tint the filler before application, or ensure it is completely covered by an opaque finish like paint.

Unopened components typically have a good shelf life when stored correctly in a cool, dry place. Once opened, use within the recommended timeframe to maintain efficacy.

Yes, Bonda Woodfill can be used on most wood-based materials, including engineered wood and MDF, provided the surface is clean and sound.

The filler itself is water-resistant once fully cured, but for continuous water exposure, it is best protected with a suitable waterproof finish.

Ensure the correct ratio of the two components was used and that they were mixed thoroughly. Check if the ambient temperature is within the recommended range for application.

For deep fills, apply in layers, allowing each layer to partially cure before adding the next. Ensure proper mixing to avoid air entrapment.

Verify that the wood surface was clean, dry, and free from any contaminants like oil, wax, or dust before application.

Ensure the filler has fully cured before attempting to sand. If it's still too soft, the mixing ratio might have been incorrect. Try using a coarser grit sandpaper initially.