Best current price£44.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£44.00Visit shop Dulux Trade Walls And Ceilings Ancient Sandstone Vinyl Matt Paint 2.5L
Visit shop3 offers from £44.00
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professional decorators looking for a reliable, easy-to-apply paint for interior walls and ceilings. The key benefit is achieving a professional, smooth finish that effectively hides minor imperfections, often with fewer coats. A key caveat is that this product is mixed to order and cannot be returned or refunded. This Dulux Trade paint offers excellent coverage, a flat matt finish, and quick-drying properties, making decorating projects more efficient.
| Colour | Cream |
|---|---|
| Model Part Number | DXVM1642500 |
| Brand | Dulux Trade |
This paint is specifically designed for interior walls and ceilings. It is not recommended for use on wood or metal surfaces unless they have been appropriately primed for emulsion paint.
The paint dries quickly. Typically, it is touch dry in 1-2 hours, and a second coat can be applied after 2-4 hours, depending on temperature and humidity.
The paint offers excellent coverage. A 2.5L can typically covers approximately 12-14 square meters per litre, depending on the surface texture and absorbency.
No, please be aware that this product is mixed to order and therefore cannot be returned or refunded.
While it can be used on walls and ceilings, it is a vinyl matt finish and not specifically designed for high-moisture environments like kitchens and bathrooms, which may benefit from a silk or washable finish.
Vinyl matt paint offers a similar flat, non-reflective appearance to standard matt paint but with added durability and washability due to the vinyl content, making it more resistant to scrubbing than a standard matt.
Clean up any spills or drips immediately with a damp cloth while the paint is still wet. Tools should be cleaned with water after use.
Ensure the surface was properly prepared and that the paint was stirred thoroughly. Apply in even coats, avoiding overworking the paint in one area. A second coat may be necessary.
Apply paint with a consistent technique. Use a good quality brush or roller appropriate for matt finishes. Avoid applying too much pressure and finish strokes in the same direction.
Ensure the paint has been stirred sufficiently. If needed, a small amount of clean water (check manufacturer guidelines, typically no more than 5-10%) can be added to aid application, but this may slightly affect coverage or finish.
Use a good quality roller and avoid overloading it. Apply paint with steady, controlled movements. Protect surrounding areas with dust sheets or masking tape.
Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Treat any mould or algae with a suitable fungicide. If painting over a glossy surface, lightly sand it to create a key.
Application: Stir the paint thoroughly before use. Apply with a brush or roller, maintaining an even film. Apply a second coat if necessary, allowing adequate drying time between coats.
Compatibility: Suitable for interior walls and ceilings. Not recommended for exterior use or surfaces subject to heavy wear and condensation. Always test in an inconspicuous area if unsure.
Care: Clean brushes and rollers immediately after use with water. Wipe away any splashes on surrounding surfaces while the paint is still wet. For maintenance, the painted surface can be wiped with a damp, clean cloth if necessary, but avoid scrubbing.
