Best current price£9.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.99Visit shop B&Q - 500 Ml Black Plastic Bumper Acrylic PaintFast Drying For Car TrimDashboards & Spoilers
Visit shop1 offer from £9.99
View price history by clicking the chart icon.
The SolaDirect Plastic Bumper Paint Acrylic Spray is designed for automotive enthusiasts and DIY restorers looking to refresh bumpers, dashboards, spoilers, and trim pieces made of PP and ABS plastics. This fast-drying formula offers exceptional adhesion and a professional, uniform black finish for both aesthetic customization and vehicle renovation projects. Please note that the spray requires careful surface preparation and degreasing, as it will not adhere correctly to contaminated surfaces or provide anti-corrosion protection for steel components.
| Colour | Black |
|---|---|
| Model Part Number | 1415516 |
| Brand | SolaDirect |
| Container Volume | 500 ml |
No, this product is specifically formulated for PP and ABS plastics. It will not provide the necessary anti-corrosion protection for metal.
While the paint has strong adhesion, light sanding with fine-grit paper is highly recommended to improve the bond, especially on old or weathered plastic.
It is designed for standard automotive trim and interior usage. It is not intended for engine bay components or high-heat areas.
Apply 2-3 thin, even coats rather than one heavy layer to achieve the best finish and prevent runs.
Yes, it is designed for ABS and PP plastics commonly found in vehicle interiors, provided the surface is cleaned of all interior dressings.
Follow the drying times listed on the product label, which vary based on ambient temperature and humidity.
The surface was likely contaminated with grease or silicone. Strip the paint, degrease the plastic thoroughly, and reapply.
Hold the can further away from the surface during application and ensure you are spraying in an environment with lower ambient temperatures.
Remove the nozzle and soak it in a suitable solvent or replace it. Always clear the nozzle by spraying upside down after each use.
Before use, shake the can thoroughly for at least two minutes to ensure pigments are properly mixed. Surfaces must be cleaned with a dedicated plastic degreaser. For older plastics, use fine-grit sandpaper to create a mechanical key for the paint. If you are painting plastic trim that attaches to steel panels, use an anti-corrosion primer on the metal parts first, as this spray does not protect against rust. Store the can in a cool, dry place away from direct sunlight, and always invert the can and spray briefly after use to clear the nozzle.
