Best current price£42.53from eBay
Shopping.co.uk recommended and popular offers
eBay£42.53Visit shop Miracle Sealants 511 Impregnator Advanced Penetrating Sealer for Countertops,
Visit shop1 offer from £42.53
View price history by clicking the chart icon.
The Miracle Sealants 511 Impregnator Penetrating Sealer is designed for homeowners and DIY enthusiasts seeking to protect porous surfaces from stains and water damage. Its key benefit is deep penetration for long-lasting protection without altering the natural look of the material. A potential caveat is its specific application requirements, demanding proper surface preparation for optimal results. This clear, quart-sized sealer is effective on a variety of natural stone, tile, and grout, offering robust defense against common household spills and environmental factors.
| Model Part Number | 511 QT SG |
|---|---|
| Brand | Miracle Sealants |
The longevity of the protection depends on the type of surface, traffic, and environmental conditions. Typically, reapplication is recommended every 1-3 years for interior surfaces and 6-12 months for exterior surfaces, or when water no longer beads up.
Yes, this sealer is excellent for porous natural stones like granite, marble, and slate, providing stain and water resistance without altering the stone's appearance.
A penetrating sealer, like the 511 Impregnator, soaks into the pores of the material to protect from within. A topical sealer forms a protective layer on the surface.
Yes, grout is very porous and can easily absorb stains and moisture. Sealing grout with 511 Impregnator will help keep it clean and prevent discoloration.
Coverage varies greatly depending on the porosity and type of surface. A general guideline is 100-200 square feet per quart for dense surfaces, and up to 400 square feet for more porous materials. Always test in a small area first.
It is generally not recommended to apply over an existing sealer. For best results, remove any old sealer completely before applying the 511 Impregnator.
Always use in a well-ventilated area. Wear gloves and eye protection. Keep away from flames or heat sources as the product may be combustible.
Excess sealer was not removed properly. Re-wet the affected area with mineral spirits and wipe thoroughly to remove residue.
The surface may not be porous enough, or it might be contaminated with oils or existing coatings. Ensure the surface is properly cleaned and prepped.
The sealer may not have been applied correctly, or it has worn off. Ensure adequate coverage, proper penetration time, and consider reapplication after the recommended interval.
This can occur if the sealer is applied to a surface that is too wet or if residues are left on the surface. Test in an inconspicuous area first. Ensure proper removal of excess product.
Setup: Ensure the surface is clean, dry, and free of any existing sealers or coatings. For best results, the ambient temperature should be between 50°F and 80°F (10°C and 27°C).
Compatibility: This sealer is ideal for porous materials including natural stone (granite, marble, slate, travertine), ceramic, porcelain, quarry tile, grout, and concrete. It is not recommended for highly polished, glossy, or non-porous surfaces.
Care: Apply the sealer using a natural applicator pad, brush, or cloth. Allow it to penetrate for 5-10 minutes. Wipe off all excess sealer from the surface with a clean, dry cloth within 15-20 minutes of application. Allow the surface to cure for at least 24-72 hours before heavy use or exposure to water. Clean tools and spills immediately with mineral spirits.
