Best current price£15.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.95Visit shop B&Q - Bubblegum Snow FoamHigh Performance Formula With Super Thick FoamNon Caustic & Ph Neutral 5L
Visit shop4 offers from £15.95 - £18.95
View price history by clicking the chart icon.
This Cleenly Snow Foam in Bubblegum scent is designed for car enthusiasts seeking an effective pre-wash solution. Its key benefit is the production of ultra-thick foam that lifts and loosens dirt for a superior clean, while leaving a pleasant scent. A potential caveat is that its effectiveness is maximized when used with a snow foam lance.
| Model Part Number | 263710T |
|---|---|
| Brand | Cleenly |
For best results, use with a snow foam lance attached to a pressure washer. Apply to a dry vehicle as a pre-wash, let it dwell, and then rinse thoroughly before proceeding to wash.
Yes, the snow foam is pH neutral and non-caustic, meaning it is gentle on your paintwork and will not strip away protective waxes or sealants.
Dilution ratios can vary depending on your snow foam lance and desired foam thickness. A common starting point is 100ml of snow foam to 400ml of water in a 1L lance, but always refer to your lance's instructions or experiment to find what works best for you.
While it cleans, Cleenly Snow Foam is specifically designed as a pre-wash to lift dirt before a contact wash. For the main wash, a dedicated car shampoo is generally recommended for optimal results and suds.
pH neutral means the product has a balance that is neither acidic nor alkaline. This ensures it cleans effectively without damaging or stripping delicate surfaces like car paint, wax, or sealant layers.
Foam thickness is primarily adjusted via the nozzle setting on your snow foam lance. A finer setting typically produces thicker foam. Experimentation with both nozzle settings and dilution ratios will yield the best results.
Avoid using in freezing temperatures. Ensure the product and your equipment are not exposed to frost, as this can damage the product and your tools. Allow the vehicle to warm slightly if possible before application.
Adjust the snow foam lance nozzle to a finer setting. Ensure correct dilution ratio of snow foam to water. Check water pressure from your pressure washer.
Ensure thorough rinsing of the foam. Avoid letting the foam dry on the surface, especially in direct sunlight. Consider using filtered or de-ionized water for the final rinse.
The bubblegum scent is a feature; however, if it's too strong, ensure thorough rinsing. For future washes, consider using less product or a different scent profile if available.
Setup:
To use Cleenly Snow Foam effectively, you will need a snow foam lance and a pressure washer. Adjust the nozzle on your snow foam lance to achieve the desired foam consistency – thicker foam generally requires a finer nozzle setting. Dilute the snow foam with water in the lance's reservoir according to the product's recommendations or your preference for foam thickness.
Compatibility:
This product is compatible with most vehicle paintwork, including clear coats, and is designed not to strip existing waxes or sealants. It is suitable for use on all car exterior surfaces.
Care:
Store the product in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cap is securely closed after use to maintain product integrity and prevent evaporation. Clean your snow foam lance regularly according to its manufacturer's instructions to prevent clogging.
