Shimano Altus 8 Speed Cassette - 11-32T

This cassette is designed for use with 8-speed HG (Hyperglide) chains.

It is recommended to clean your cassette regularly, especially after riding in wet or dirty conditions. Cleaning frequency depends on usage but at least every few rides is recommended.

Use a degreaser specifically designed for bicycle components. Apply it to the cassette and use a brush to remove dirt and grime. Rinse with water and dry thoroughly.

Replace the cassette when the teeth show significant wear, such as a hooked or shark-fin appearance. Also, if shifting performance degrades despite adjustments.

Yes, this cassette is suitable for mountain bikes, especially those with 8-speed drivetrains. The 11-32T range is good for varied terrain.

Yes, the Shimano Altus 8 Speed Cassette includes a corrosion-resistant steel cassette lockring.

The weight of the cassette is approximately 377 grams.

Check and adjust the rear derailleur indexing. Ensure the chain is clean and lubricated. Check for any bent teeth on the cassette.

Inspect the chain for wear and replace if necessary. Check the cassette for worn teeth and replace if needed. Adjust the derailleur cable tension.

Ensure the cassette removal tool is the correct type and size. Make sure the freehub body is clean and free of debris. Apply a small amount of grease to the threads of the freehub body.