Gardena Micro-Drip-System Endline Drip Head - 2 L/h

The Gardena Endline Drip Head delivers a precise flow rate of 2 liters per hour (2 l/h).

No, this drip head is designed specifically for use with Gardena's 4.6 mm Supply Pipe or 13 mm Connecting Pipe systems. It requires compatible Gardena components for proper function.

You can screw or expand the drip head directly into the 13 mm Connecting Pipe using the "Easy & Flexible" connection technology provided by Gardena.

This technology simplifies the installation of Gardena system components by allowing them to be easily screwed, expanded, and adjusted within the pipes, ensuring a secure connection.

No, the Assembly Tool (Art. No. 8322) is typically sold separately and is required for installing the drip head at the end of a 4.6 mm Supply Pipe.

This product contains one (1 pc(s)) Endline Drip Head per pack.

It is ideal for individual potted plants or rows of plants with similar watering needs, such as hedges or vegetable rows, where a consistent, low water application is beneficial.

Check for blockages within the drip head or the supply pipe. Ensure the pipe is properly connected and the water supply is turned on. Verify that the drip head is correctly installed in the pipe.

Ensure all drip heads are at the same elevation. Check for kinks or obstructions in the connecting pipes. Verify that the water pressure is adequate and consistent for the system.

Re-seat the drip head in the pipe, ensuring a snug fit. If using the Assembly Tool on a 4.6mm pipe, ensure the insertion was clean. For 13mm pipes, ensure it's fully expanded or screwed in. Inspect the pipe for damage.

Confirm the water source is providing sufficient pressure. Check the main water connection and the entire length of the pipe for any restrictions or leaks. Clean any filters if present in the main water supply.