Gledhill Stainless Lite Plus Unvented Direct Cylinder 150 Litres - PLUDR150

An unvented cylinder is a water heater that takes its water directly from the mains supply, providing mains-pressure hot water without the need for a cold-water storage tank.

Yes, installation must be carried out by a qualified and certified professional.

It is recommended to have the cylinder serviced annually by a qualified professional.

The product warranty details are not available in the provided product data. Please refer to the product documentation or contact the manufacturer for warranty information.

Immersion heaters are electrical heating elements that heat the water stored inside the cylinder.

The provided data does not specify solar panel compatibility. Consult with a professional to determine compatibility.

Check your mains water pressure. A qualified installer can measure this during installation or servicing.

Check the electrical supply to the immersion heaters and the thermostat settings. Ensure the water supply is turned on.

Check the mains water supply pressure. Ensure that there are no blockages in the pipework. Check the valve on the mains water supply is fully open.

Turn off the water supply immediately. Inspect all fittings and connections for leaks. Tighten connections as needed. Call a qualified professional if the issue persists.