Foxydry Suspension Cable Kit - Steel Cable Kit

No, this suspension cable kit is specifically designed and tested for use with the Foxydry Air and Foxydry Pro models only.

The kit is designed to support the standard weight of laundry when used with the Foxydry Air or Pro. Always refer to the Foxydry drying rack's manual for its specific weight limit and avoid overloading.

The steel suspension wires are 1.5 meters (approximately 5 feet) in length and are adjustable to suit different installation requirements.

Basic tools like a drill, screwdriver, and possibly a level might be needed. For sloped or difficult ceilings, professional installation might be recommended, which would involve appropriate tools for that specific ceiling type.

The kit is made from rust-resistant steel, making it suitable for humid environments or covered outdoor areas. However, prolonged direct exposure to harsh weather conditions is not recommended.

The kit requires a minimum of four secure mounting points on the ceiling, using the included eyebolts, to attach the four suspension wires of the drying rack.

Adjust the length of the individual steel suspension wires until the rack is balanced and level.

Remove the eyebolt, check the mounting hole, and reinstall with appropriate anchors or consider a different, more secure location. Professional consultation may be needed for difficult materials.

Ensure you are using the correct clamps provided with the kit and that they are aligned with the rack's frame as per the Foxydry rack's manual.

Clean the wires with a damp cloth. While the steel is rust-resistant, prolonged exposure to harsh moisture without ventilation can affect appearance. Ensure the area has adequate airflow.