Kenable Cable Entry Cover Plate - Brown

It is recommended to use a high-quality exterior-grade adhesive or silicone sealant suitable for outdoor use. This will ensure a durable and weatherproof bond.

You can clean the surface with a damp cloth. For tougher marks, a mild soap solution can be used. Rinse and dry thoroughly. Avoid harsh chemicals or abrasive scrubbers.

While the plate is designed to blend with brickwork, painting may be possible. It is advisable to use a paint suitable for exterior plastics and to test on an inconspicuous area first to ensure adhesion and finish.

The cable exit hole measures approximately 25mm in diameter.

Yes, the cover plate is constructed with UV-resistant material to prevent degradation and fading from sun exposure.

The product listing is for a single (1) cover plate.

The single exit hole is 25mm wide. It can accommodate several thinner cables (like networking or satellite) bundled together, but if the total diameter is larger, you may need to consider alternative solutions or separate plates.

Ensure the wall surface is clean and dry before application. Use sufficient exterior-grade adhesive and apply it evenly around the edges. Check that the cables do not prevent the plate from sitting flush against the wall.

Re-examine the seal around the plate and cable exit. Apply additional sealant if gaps are detected. Ensure the plate itself is adequately adhered to the wall.

The exit hole is 25mm in diameter. If your cable bundle is larger, you may need to drill a larger opening in the wall and use a larger grommet, or use two separate cover plates for different cables.