Keenetic Sprinter SE - Keenetic - KN-3712-01-EU
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Keenetic Sprinter SE is a Wi-Fi 6 AX3000 router designed for users seeking high-speed, reliable internet coverage throughout their homes. Its key benefit is the combination of advanced Wi-Fi 6 technology, multi-core processing, and multiple Gigabit Ethernet ports for both wired and wireless performance. A potential caveat is its reliance on a web-based interface for advanced configuration, which may require some technical familiarity.
All features
| Model Part Number | KN-3712-01-EU |
|---|---|
| Brand | KEENETIC |
Extended Product Information
FAQs
What is Wi-Fi 6 and why is it important?
Wi-Fi 6 (802.11ax) is the latest Wi-Fi standard, offering faster speeds, lower latency, higher capacity, and better efficiency, especially in environments with many connected devices, compared to older standards like Wi-Fi 5 (802.11ac).
Can I use this router to extend my existing Wi-Fi network?
Yes, the Keenetic Sprinter SE supports Keenetic's Intelligent Mesh technology, allowing you to integrate it with other compatible Keenetic devices to create a larger, unified Wi-Fi network.
How do I access the router's settings?
You can access the router's web-based management interface by typing `192.168.1.1` or `mykeenetic.net` into a web browser connected to the network. You will need to log in with your router's administrator credentials.
What is the maximum theoretical Wi-Fi speed?
The router supports AX3000 speeds, with a theoretical maximum of 574 Mbps on the 2.4 GHz band and 2402 Mbps on the 5 GHz band, for a combined total of up to 3000 Mbps.
Does this router support VPN connections?
Yes, the Keenetic Sprinter SE supports IPsec VPN (client/server) and also functions as a VPN server using OpenVPN.
What security protocols does the Wi-Fi support?
It supports advanced security algorithms including OWE, WEP, WPA-PSK, WPA2-Enterprise, WPA2-PSK, WPA3-Enterprise, and WPA3-PSK, providing robust protection for your wireless network.
How many devices can be connected simultaneously?
While there isn't a strict limit, Wi-Fi 6, MU-MIMO, and OFDMA technologies are designed to efficiently handle a large number of connected devices without significant performance degradation.
Troubleshooting
No internet connection
Verify that the WAN cable is securely connected from the modem to the router. Restart both the modem and the router. Check your ISP's service status and confirm your internet plan is active. Ensure WAN settings in the router configuration are correct.
Slow Wi-Fi speeds
Ensure you are connected to the 5 GHz band for faster speeds. Check for interference from other electronic devices or neighboring Wi-Fi networks. Consider changing the Wi-Fi channel in the router settings. Update the router's firmware.
Cannot connect to Wi-Fi network
Double-check the Wi-Fi password. Ensure your device is within range of the router. Try restarting both your device and the router. If using MAC filtering, ensure your device's MAC address is allowed.
Router is unresponsive
Power cycle the router by unplugging it for 30 seconds and plugging it back in. If the issue persists, perform a factory reset by pressing the reset button (usually located on the back or bottom) for about 10-15 seconds while the router is powered on.
Pros and Cons
Pros
- Supports the latest Wi-Fi 6 standard for superior performance.
- Multiple Gigabit Ethernet ports offer robust wired connectivity options.
- MU-MIMO and OFDMA technologies improve efficiency on busy networks.
- Web-based management allows for straightforward setup and control.
- Dual-band operation caters to a variety of devices and use cases.
Cons
- Advanced features might require a moderate level of technical knowledge to configure.
- Does not support 3G/4G USB modem connectivity.
- Internal antennas may limit placement flexibility compared to external antennas.
Setup, Compatibility & Care
Setup:
- Connect the WAN port of the Keenetic Sprinter SE to your modem using the included LAN cable.
- Plug in the AC adapter and connect it to the router.
- Power on the router and wait for the LEDs to stabilize.
- Connect a computer to one of the LAN ports or via Wi-Fi using the default network name (SSID) and password found on the device's label.
- Open a web browser and navigate to the router's IP address (typically `192.168.1.1`) or use the `mykeenetic.net` portal.
- Follow the on-screen wizard to configure your internet connection, Wi-Fi settings, and security options.
Compatibility:
The Keenetic Sprinter SE is compatible with most internet service providers (ISPs) using standard WAN connection types like RJ-45. It supports various network protocols including IPoE, PPPoE, PPTP, L2TP, and 802.1x. It is designed to work seamlessly within the Keenetic ecosystem for mesh networking.
Care:
- Cleaning: Disconnect the power before cleaning. Wipe the exterior with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ventilation: Ensure the router is placed in a well-ventilated area to prevent overheating. Do not obstruct the ventilation openings.
- Firmware Updates: Regularly check for and install firmware updates via the web interface to ensure optimal performance and security. The router also supports automatic updates.