Best current price£37.99from eBay
Shopping.co.uk recommended and popular offers
eBay£37.99Visit shop 4x Bartoline TX10 Paint Varnish Stripper Non-Caustic Extra Strong Wood Metal 1L
Visit shop
B&Q£39.99Visit shop B&Q - 4X Tx10 Paint Varnish Stripper Non-Caustic Extra Strong Wood Metal 1L
Visit shop3 offers from £37.99 - £39.99
View price history by clicking the chart icon.
The Bartoline TX10 Paint Varnish Stripper is designed for DIY enthusiasts and professionals tackling tough stripping jobs, offering a powerful, non-flammable, and non-caustic solution for removing multiple layers of paint and varnish. Its key benefit is its slow evaporation rate, which allows it to work effectively on vertical surfaces and in hard-to-reach areas without drying out too quickly. However, it requires a significant dwell time, especially for multiple layers, and careful preparation is essential to avoid damaging surrounding materials.
| Colour | White |
|---|---|
| Model Part Number | TX10 |
| Brand | Bartoline |
Yes, Bartoline TX10 is suitable for indoor application. However, ensure adequate ventilation as with any chemical product.
Leave for approximately 1 hour. For surfaces with fewer than 5 layers, a second coat may not be necessary. For maximum effect with significant paint layers, cover with plastic sheeting and leave for 6-8 hours.
Bartoline TX10 strips most solvent and water-borne paints and varnishes, including polyurethane varnishes.
No, do not use wire wool. Rub down the stripped area with a scrubbing brush.
It is suitable for wood, masonry, and most metal substrates. Always test compatibility on a small, inconspicuous area first for metals, plastics, and other substrates.
Ensure you applied a thick, even coat and allowed sufficient dwell time. For stubborn layers, a second application or covering with plastic sheeting for an extended period (6-8 hours) may be required.
Store Bartoline TX10 in a cool, dry place and protect it from frost.
Ensure a thick, generous coat was applied and not brushed out. For multiple layers, a second application or covering with plastic sheeting for 6-8 hours may be necessary. The surface may not be completely dry before application.
While the formula is non-drip, very thick or numerous applications might still show some minor run-off. Ensure only a thick, even coat is applied. A second dabbing coat is usually sufficient.
Ensure the stripped area is thoroughly washed down with detergent and water, followed by a clean water rinse. Stubborn residue might require a second application of the stripper.
Ensure adequate protection (drop cloths, masking tape) was used before application. Always test compatibility on a small, inconspicuous area first, especially on plastics or sensitive finishes.
Preparation:
Compatibility:
Application:
Care & Storage:
