Best current price£18.82from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£18.82Visit shop U-Pol Gravitex Stone Chip Overpaintable Protection 1 Litre X 1 + Air Gun White 5290753356300
Visit shop2 offers from £18.82
View price history by clicking the chart icon.
U-Pol GraviTex is an essential tool for automotive enthusiasts and professionals looking to protect vehicle chassis and lower body panels from stone chips, road debris, and rust. This durable, hard-wearing coating offers a robust barrier against environmental wear, though users should be prepared to perform thorough surface preparation to ensure the paint adheres correctly to the substrate.
| Colour | White |
|---|---|
| Model Part Number | U-Pol GraviTex White 1ltr Chip Paint + Applicator |
| Brand | U-Pol |
Yes, provided the existing paint is sound, clean, and has been lightly sanded to provide a mechanical key for adhesion.
Yes, the included applicator gun requires an air compressor to function correctly.
Refer to the product label for specific flash-off times, but generally, allow the coating to cure fully until it is dry to the touch and no longer tacky.
It is a protective coating; while it seals against future moisture, it should be applied over treated or clean metal, not directly over flaking loose rust.
This specific variant is white, which provides a clean base for lighter topcoat colors.
Check air pressure settings and ensure the nozzle of the applicator gun is not partially clogged.
Surface was likely not properly cleaned or degreased prior to application; ensure all contaminants are removed.
Ensure the working environment is well-ventilated and within the recommended temperature range; avoid high humidity.
To prepare for application, ensure the target area is completely clean, dry, and free of grease or loose rust. Mask off areas that do not require coating to prevent overspray. The GraviTex system is compatible with most standard automotive paint systems, making it simple to finish with a color-matched topcoat. For care, keep the applicator gun clean by flushing it with an appropriate solvent immediately after use to prevent the coating from hardening inside the nozzle. Store the remaining product in a cool, dry place and ensure the container lid is sealed tightly to prevent moisture contamination.
