Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from grease and contaminants. Lightly abrade the surface if necessary.
- Shake the can vigorously for at least two minutes before use.
- Apply the Grey Primer in light, even coats, allowing adequate drying time between applications.
- Once the primer is dry, apply the Diamond Silver Metallic paint in several thin coats, holding the can approximately 25-30cm from the surface.
- Allow the metallic paint to dry before applying the Clear Lacquer in similar light coats for protection and gloss.
Compatibility:
This product is compatible with OEM finishes, acrylic paints, and cellulosic paints. Always test on an inconspicuous area first if unsure.
Care:
Store cans in a cool, dry place away from direct sunlight and sources of ignition. After use, invert the can and spray for a few seconds to clear the nozzle.