Best current price£61.43from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£61.43Visit shop Schneider Electric Harmony Pendant Pushbutton Box Complete - Xaca2013
Visit shop2 offers from £61.43 - £217.86
View price history by clicking the chart icon.
The Schneider Electric Harmony XACA2013 pendant pushbutton box is designed for industrial lifting applications, offering intuitive control for cranes and hoists. Its primary benefit is enhanced operational safety and ease of use, even with gloves, due to its rugged, double-insulated thermoplastic construction and clear button layout. A key consideration is its specific configuration for lifting functions, meaning it's optimized for raise, lower, and emergency stop actions.
| Series | Harmony XACA |
|---|---|
| Model Part Number | XACA2013 |
| Brand | Schneider Electric |
This pendant station is primarily designed for controlling lifting applications such as overhead cranes, hoists, and similar machinery.
Yes, the XACA2013 has an IP65 rating, which protects it against dust and low-pressure water jets, making it suitable for outdoor applications.
Yes, it is ergonomically designed for easy handling and operation, even when the user is wearing heavy work gloves.
It features two push buttons with 1 Normally Open (NO) contact each for raise and lower, and one latching Emergency Stop button with 1 Normally Closed (NC) contact.
The station is rated for a maximum of 10A.
The emergency stop button features a latching mechanism. To reset it, you typically need to twist it (turn-to-release) or pull it, depending on the specific button design, after the condition requiring the stop has been resolved.
The unit utilizes screw terminals for easy and secure electrical connections.
Verify that the control circuit is properly wired and receiving the correct voltage. Check all connections at the screw terminals for tightness and ensure the emergency stop button is released.
Inspect the wiring for the corresponding contact block (ZB2BE101). Ensure the button is making proper contact and that there is no debris obstructing its movement. Check the integrity of the connection at the screw terminal.
Ensure the emergency stop contact block (ZB2BE102) is correctly installed and wired. Try operating the button manually; if it feels stiff or stuck, check for obstructions. If the issue persists, the contact block may need replacement.
While rated IP65, ensure all cable entries are sealed and that the enclosure is properly closed. Excessive water ingress could compromise performance. Inspect for any potential damage to the enclosure seals.
Setup: The XACA2013 features screw terminals for straightforward connection. Ensure the power supply is disconnected before wiring. Connect the 'raise' function to the first 1 NO contact block (ZB2BE101), the 'lower' function to the second 1 NO contact block (ZB2BE101), and the 'emergency stop' to the 1 NC latching contact block (ZB2BE102). Refer to local electrical codes and ensure proper grounding.
Compatibility: This pendant station is designed for control circuit applications, typically used with electric hoists, cranes, and similar lifting machinery. It operates on standard control voltages and is rated for up to 10A. It is compatible with IEC standards for safety and performance.
Care: Keep the enclosure clean by wiping it with a damp cloth; avoid using harsh solvents. Regularly inspect the push buttons and enclosure for any signs of damage. Ensure the emergency stop button operates freely and latches correctly. The IP65 rating means it can be cleaned with a damp cloth, but avoid high-pressure water jets.
