Best current price£14.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.99Visit shop B&Q - Self Adhesive Stick On Tiles Granite Tablet 8" X 4" Box Of 8 Apply Over Any TileOr Directly On To The Wall
Visit shop1 offer from £14.99
View price history by clicking the chart icon.
The Stick and Go Granite Tablet wall tiles are designed for DIY enthusiasts and homeowners seeking an instant, professional kitchen or bathroom refresh without the mess of traditional tiling. These polypropylene tiles provide a durable, waterproof surface that adheres directly to smooth walls or existing tiles, offering a significant aesthetic upgrade with minimal effort. While they provide a sleek, granite-inspired finish, it is important to note that they are strictly intended for non-porous surfaces and should not be applied to highly textured or damp, unsealed walls.
| Model Part Number | SAG-8x4-1 |
|---|---|
| Brand | Stick and Go |
While they are waterproof, they are best suited for backsplash areas. They are not recommended for direct, constant water immersion inside a shower cabin.
No, these tiles come with a professional-grade self-adhesive backing that is designed for direct application.
For best results, the wall should be smooth and primed/sealed. Bare, porous drywall may not provide a strong enough bond for the adhesive.
Measure the distance of the socket from the edge, mark it on the tile, and cut out the shape using a craft blade or heavy-duty scissors.
They are steam and humidity resistant. However, avoid placing them in direct contact with an open flame or extreme high-heat sources like a professional-grade gas stove flame.
The adhesive is designed for a single installation. Once removed, the adhesive layer will likely lose its tackiness and will not provide a secure bond for a second application.
Ensure the surface is completely free of dust, grease, or moisture. If the wall is painted, ensure the paint is fully cured and not flaking.
Gently lift the corner of the tile and re-apply, using a squeegee or soft cloth to press from the center outward to push the air to the edges.
Apply gentle heat with a hairdryer to warm the adhesive, making it more pliable, then peel slowly. Clean residue with white spirit.
Before installation, ensure the wall surface is entirely smooth, clean, and dry. If applying over existing tiles, scrub them to remove all grease or residues. To install, peel the backing away and press firmly starting from the center of the tile outward to ensure a bubble-free finish. For care, clean the surface periodically with a soft, damp cloth and mild detergent; avoid abrasive scrubbers that could dull the finish. To remove the tiles, peel them off slowly at a 45-degree angle. If any adhesive residue remains on your wall, it can be wiped away safely using a cloth soaked in white spirit.
