D C Fix Self Adhesive Vinyl Wall Tiles Amira Grey - 15cm x 15cm
Each tile is 15cm x 15cm (1.2mm thickness). You will receive 3 packs of 6 tiles = 0.42 square metr...Each tile is 15cm x 15cm (1.2mm thickness). You will receive 3 packs of 6 tiles = 0.42 square metres. This is an easy solution for covering over existing flat wall tiles in your kitchen or bathroom. The vinyl wall tiles are self adhesive, can be stuck over your tiles or onto painted walls. They are not like conventional tile stickers; they are made from rigid vinyl. Mix and match with different designs in this collection. Whether you're a tenant, homeowner, or landlord looking for a quick fix to your splash-back, the peel and stick application makes it so simple, mess-free, and hassle-free!
Application:
1) Use to cover existing splash-backs without the grout lines showing through.
2) Let the product acclimatize in the room for 48 hours prior to application.
3) Allow 4 weeks for newly painted surfaces to fully cure.
4) Measure the area to be covered before ordering to ensure you order the right number of tiles.
5) Remove the backing paper prior to application; the self-adhesive tiles butt together, no grouting required.
6) Score tile with a utility knife and snap back.
Aftercare:
1) Tiles are water-resistant but not suitable for wet areas like a shower cubicle.
2) Avoid scrubbing and using harsh abrasive chemicals.
3) Splashes wipe off effortlessly, but remove spillages that may stain (e.g., curry).
4) Remove tiles by using a flat-headed screwdriver to carefully prise the tile away from the surface. Clean away any remaining adhesive residue with warm soapy water.
5) Keep away from direct heat like a gas hob.
6) Tiles are steam resistant and once bonded, should not lift off easily.
This guide is for homeowners, tenants, and landlords looking for a quick and easy way to update kitchen or bathroom splash-backs. The D C Fix Self Adhesive Vinyl Wall Tiles offer a mess-free solution for covering existing flat wall tiles or painted surfaces with a stylish Amira Grey design. While they provide a simple peel-and-stick application without grout, they are water-resistant but not suitable for wet areas like shower cubicles.
All features
Model Part Number
5056525355908
Brand
D C Fix
Extended Product Information
FAQs
How many tiles are in a pack?
Each pack contains 6 tiles.
What is the size of each tile?
Each tile measures 15cm x 15cm and has a thickness of 1.2mm.
How much area does one pack cover?
3 packs (18 tiles total) cover approximately 0.42 square metres.
Can these tiles be used in a shower cubicle?
No, the tiles are water-resistant for splashes but are not suitable for wet areas like shower cubicles.
Do I need grout for these tiles?
No, these tiles are designed to butt together without the need for grout.
How do I remove the tiles if I want to change them?
You can carefully prise the tile away from the surface using a flat-headed screwdriver. Clean any remaining adhesive residue with warm soapy water.
Can I apply these over existing wallpaper?
It is recommended to apply these tiles over existing flat wall tiles or painted surfaces only. Application over wallpaper is not advised as it may not adhere properly and could damage the wallpaper.
Are these tiles heat resistant?
The tiles are steam resistant but should be kept away from direct heat sources like gas hobs.
Troubleshooting
Tiles are not sticking well.
Ensure the application surface is clean, dry, and smooth. Re-press firmly. If covering old tiles, ensure they are not loose or damaged. Allow paint 4 weeks to cure before application.
Bubbles appearing under the tiles.
Carefully lift the affected tile and reapply, smoothing out any trapped air as you press it down. Ensure the surface is completely flat.
Difficulty cutting tiles precisely.
Use a sharp utility knife and a metal ruler for a straight guide. Score the tile multiple times lightly rather than trying to cut through in one pass. Ensure you snap the tile backward along the scored line.
The design looks dull after cleaning.
Avoid using harsh chemicals or abrasive cleaners. Use a soft, damp cloth with mild soap and water. Wipe spills promptly to prevent staining.
Tiles lifting at the edges.
Ensure the edges are pressed down firmly. Check for any moisture or grease that might be preventing adhesion. Ensure the tile is not too close to a heat source or constant steam.
Pros and Cons
Pros
Extremely easy to apply with peel-and-stick functionality.
Cost-effective alternative to re-tiling.
Instantly updates the look of kitchens and bathrooms.
Hides imperfections and old tile grout lines effectively.
Water-resistant for everyday splashes.
Can be mixed and matched with other designs in the collection.
Cons
Not suitable for wet areas like shower cubicles.
Requires a 48-hour acclimatization period before application.
Newly painted walls need 4 weeks to cure before application.
Care must be taken to avoid harsh chemicals and scrubbing during cleaning.
Requires careful removal to avoid adhesive residue.
Not suitable for placement near direct heat sources like gas hobs.
Setup, Compatibility & Care
Setup:
Ensure the surface is clean, dry, and flat. If applying over existing tiles, they should be flat and well-adhered.
Allow the tiles to acclimatize in the room where they will be applied for 48 hours before installation.
If applying to newly painted walls, wait at least 4 weeks for the paint to fully cure.
Measure the area to be covered carefully to ensure you have enough tiles.
Peel the backing paper off the tile.
Align the tile with the existing surface, ensuring no grout lines show through if covering old tiles.
Press the tile firmly into place, butting the edges against the next tile.
To cut tiles, score the front surface with a utility knife and carefully snap the tile along the score line.
Compatibility:
Suitable for existing flat wall tiles and painted walls.
Not suitable for: textured surfaces, uneven surfaces, walls with wallpaper, direct contact with water (e.g., shower cubicles), or areas near direct heat sources like gas hobs.
Care:
Tiles are water-resistant; wipe away splashes with a damp cloth.
Remove spillages that may stain (e.g., curry) promptly.
Avoid scrubbing or using harsh abrasive chemicals, as this can damage the surface.
To remove, carefully use a flat-headed screwdriver to pry the edge and lift the tile away. Clean any residual adhesive with warm, soapy water.