Best current price£31.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£31.75Visit shop B&Q - Ankerbolts Hexagon Head Bzp10/12 X 100mmFjjab10/12100Box Of 50
Visit shop3 offers from £31.75 - £35.80
View price history by clicking the chart icon.
This guide is for construction professionals and DIY enthusiasts needing robust, reliable anchoring solutions. The JCP Fixings Ankerbolts offer exceptional strength and corrosion resistance for heavy-duty applications, ensuring secure connections. A key consideration is ensuring the correct substrate and hole preparation for optimal performance.
| Model Part Number | Fjjab10/12100 |
|---|---|
| Brand | JCP Fixings |
These Ankerbolts are suitable for solid substrates such as concrete, solid brick, and stone. They are not designed for use in hollow materials like hollow blocks or plasterboard.
Typically, a 14mm drill bit is recommended for a 10/12mm Ankerbolt. Always refer to the product packaging or manufacturer's specifications for precise guidance.
The required hole depth depends on the specific Ankerbolt size and the substrate material, but it should be deeper than the embedment depth of the bolt to allow for proper expansion. Consult the product's technical data sheet for exact dimensions.
Yes, the BZP (Bright Zinc Plating) coating provides good corrosion resistance, making them suitable for many outdoor applications. However, in extremely corrosive environments, consider stainless steel options.
Tighten the hexagon nut with a wrench until the bolt shank has expanded and feels secure. Avoid over-tightening, which could damage the substrate or the bolt.
BZP stands for Bright Zinc Plating. It's a protective coating applied to steel to provide a barrier against corrosion and give a bright, shiny appearance.
Ankerbolts are generally considered permanent fixings once installed and expanded. While it may be possible to remove them, it often involves damaging the bolt and potentially the substrate.
The hole may be too large or not sufficiently clean. Ensure the correct drill bit size is used and the hole is thoroughly cleaned of dust and debris before insertion.
Check that the drilled hole is clear of obstructions and debris. Ensure the drill bit size used is correct for the Ankerbolt diameter.
Verify that the Ankerbolt is inserted to the correct depth and that the substrate is solid and suitable. Ensure the nut is being tightened evenly and sufficiently.
While BZP offers good protection, extreme conditions may lead to surface rust. For critical applications in harsh environments, consider using stainless steel alternatives or protective coatings.
Setup:
Compatibility:
These Ankerbolts are designed for use in solid substrates such as concrete, brick, and stone. Ensure the substrate is sound and capable of bearing the intended load. Not recommended for use in hollow materials or plasterboard.
Care:
While the BZP coating offers good corrosion resistance, avoid prolonged exposure to highly corrosive environments without additional protection. Periodically inspect installed bolts for any signs of corrosion or loosening, especially in critical structural applications.
