Mirror Screw - Phillips Pan Head - (L)38mm - Pack Of 2

These screws are designed for small, lightweight mirrors and pictures. The exact weight capacity depends heavily on the wall material and the type of wall plug used. Always use appropriate wall fixings for your specific wall type and ensure the total weight does not exceed safe limits.

No, this pack contains two mirror screws only. Wall plugs are sold separately and should be chosen based on your wall type (e.g., plasterboard, masonry) and the item's weight.

No, these screws are specifically intended for light decorative items. For heavier mirrors or pictures, you will need to use heavier-duty fixings designed for significant load-bearing.

You will need a standard Phillips head screwdriver to install these screws.

These screws are generally intended for indoor use. Prolonged exposure to outdoor elements may lead to corrosion.

The pilot hole depth should be slightly deeper than the length of the screw or the wall plug you are using, ensuring the screw can be fully inserted and the wall plug is engaged correctly.

Ensure you are using the correct size Phillips screwdriver. If mounting on plasterboard, the pilot hole may be too large for the wall plug; try a slightly larger wall plug or re-evaluate the mounting surface.

Apply gentle, consistent pressure and ensure the screwdriver is fully seated in the screw head. If the head is already stripped, a screw extractor tool may be needed, or consider carefully drilling out the screw.

Check if the screws are fully tightened. If using wall plugs, they may not be holding securely; remove the screw, inspect the wall plug, and reinsert, or use a different type of wall anchor suitable for your wall type and the item's weight.

This product is not designed for highly corrosive environments. Ensure the area is not excessively damp. Light surface rust can sometimes be cleaned with a rust remover, but for persistent issues, consider a stainless steel alternative for damp areas.