Best current price£15.13from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£15.13Visit shop Premier Air Blow Gun With Angled Lance 1/4Inbsp Air Inlet 280 X 8Mm
Visit shop
B&Q£23.17Visit shop B&Q - Air Blow Gun With Angled Lance 280 X 8mm 1/4"bsp Air Inlet
Visit shop7 offers from £15.13 - £23.17
View price history by clicking the chart icon.
The Sealey SA9231 is designed for professional mechanics and workshop technicians who require a reliable tool for clearing debris, dust, and particulate from work surfaces and machinery. Its standout benefit is the 280mm angled lance, which allows for surgical precision in tight, hard-to-reach areas of a bodyshop or garage. One caveat to keep in mind is that at its maximum pressure of 232psi, the tool requires careful handling to avoid damaging sensitive components or causing injury from flying debris.
| Model Part Number | SA9231 |
|---|---|
| Brand | Sealey |
The SA9231 is rated for a maximum operating pressure of 232psi.
The lance is integrated into the design to ensure durability and maintain high-pressure integrity.
Yes, provided your compressor uses a 1/4 inch BSP fitting and is capable of meeting the required operating pressure.
No, it features a 1/4 inch BSP air inlet, so you will need to attach your preferred quick-release male adapter.
No, the lance is rigid to allow for precise control and consistent airflow delivery.
Check the internal seals for wear and ensure the trigger pin is properly seated; replace if damaged.
Inspect the lance tip for debris buildup and verify that the air compressor pressure is set correctly.
To set up the SA9231, ensure your workshop air supply is equipped with a 1/4 inch BSP female coupling. It is recommended to use a PTFE tape or thread sealant on the fitting to prevent air leaks at the connection point. For maintenance, regularly inspect the trigger mechanism for smooth travel and ensure the lance tip remains free of obstructions. Avoid dropping the tool on concrete, as impacts can damage the precision tip of the lance. If the airflow becomes restricted, use compressed air to back-blow the nozzle to clear any trapped particulate.
