Home Office Chair - Grey Fabric and Chrome Base

To adjust the height, locate the lever under the seat. Lift the lever to release the gas lift mechanism. To raise the seat, stand up while holding the lever. To lower the seat, sit down while holding the lever. Release the lever to lock the height in place.

The chair is upholstered in a grey fabric that is designed to be soft and resilient for regular indoor use.

Assembly is required, and while typically straightforward, it's recommended to follow the provided instructions carefully. Most users find assembly manageable with basic tools.

The chair dimensions are Height 99cm x Depth 63cm x Width 57cm.

The chair weighs approximately 11kg.

Yes, the five smooth-rolling caster wheels are designed to move easily on various floor surfaces, including hardwood floors. However, it's always good practice to check if your specific flooring requires additional protection.

The chrome base can be cleaned with a soft, damp cloth. Avoid abrasive cleaners which can scratch the finish. Dry thoroughly after cleaning.

Ensure all bolts and screws are fully tightened. Check that the base is properly seated on the gas lift cylinder and that the caster wheels are securely in place.

Verify the gas lift lever is functioning correctly. Ensure the seat mechanism is securely attached. If the issue persists, the gas lift cylinder may need replacement.

Check the caster wheels for any debris or obstructions. Gently clean the wheels and try rolling them again. Ensure they are properly seated in their sockets.

Spot clean affected areas immediately with a damp cloth and mild soap. For more stubborn stains, consult a professional upholstery cleaner. Avoid harsh chemicals.