STORM TRADING GROUP Cherry Snow Foam - Ultra-Snow Foam

The most effective method is using a foam lance attached to a pressure washer. This creates a thick, clinging foam that provides the best pre-wash coverage.

Allow the foam to dwell for approximately 5-10 minutes. Do not let it dry on the surface. Rinse thoroughly afterwards.

While it is a powerful detergent, it is primarily designed as a pre-wash. For the main wash, a dedicated pH-neutral car shampoo is generally recommended for optimal results and paint safety.

Refer to the product label for the most accurate dilution ratios. General guidelines often range from 1:5 to 1:20 (product to water) for foam lances, depending on desired foam thickness and cleaning power.

The product has a pleasant cherry fragrance, designed to make the washing process more enjoyable without being overpowering.

Store the 1-litre bottles in a cool, dry place away from direct sunlight with the cap securely fastened.

As a heavy-duty detergent, prolonged or highly concentrated application might affect delicate wax or sealant layers. It's recommended for use on vehicles where maintaining the existing protection is not the primary concern for the pre-wash step.

Adjust the dilution ratio; increase the concentration of snow foam. Ensure your foam lance is correctly assembled and functioning. Check water pressure from your pressure washer.

Ensure thorough rinsing with clean water. Try rinsing from the bottom of the vehicle upwards. You may have used too high a concentration; try a weaker dilution next time.

Allow the foam to dwell for the recommended time (typically 5-10 minutes). For very stubborn grime, a gentle agitation with a soft wash mitt during the contact wash may be needed after the pre-wash.