Best current price£10.99from eBay
Shopping.co.uk recommended and popular offers
eBay£10.99Visit shop Shoe Goo II - 26.6ml - Clear Shoe Repair Glue, Low Odour - Solvent Free Adhesive
Visit shopeBay£13.50Visit shop Angelus Clear Shoe Cement Glue - 4oz
Visit shop9 offers from £10.99 - £15.95
View price history by clicking the chart icon.
This guide is for DIY shoe repair enthusiasts and cobblers looking for a reliable adhesive. The key benefit is its versatility and strong bond for various shoe materials. A caveat to note is its flammability. Angelus Clear Shoe Cement is an all-purpose glue designed for fixing shoe soles, capable of adhering to leather, rubber, plastic, vinyl, and fabrics. Its clear formula ensures no unsightly stains, and it comes in a convenient 4 fluid oz can.
| Model Part Number | 992-04-000 |
|---|---|
| Brand | Angelus |
It can be used on leather, rubber, plastic, vinyl, and fabrics.
No, the formula is clear and dries clear to avoid noticeable stains.
It typically becomes tacky in 5-15 minutes and fully cures over a longer period, depending on application thickness and environmental conditions. Ensure sufficient clamping time.
Yes, the product is flammable. It should be stored and used away from heat, sparks, and open flames.
Store the can tightly closed in a cool, dry place away from direct sunlight and heat sources.
While designed for shoe repair, its versatility makes it suitable for other projects involving the compatible materials, provided you adhere to safety warnings.
Ensure surfaces are clean, dry, and free of contaminants. Reapply adhesive, ensuring proper tackiness before joining surfaces. Increase pressure or clamping time.
This can occur in humid or cold conditions. Ensure the product is within its recommended application temperature range. Apply a thinner coat or increase ventilation.
Ensure the can lid was sealed properly to prevent premature drying. If slightly dried, it may need to be discarded. Always store with the lid tightly shut.
Setup: Ensure the surfaces to be bonded are clean, dry, and free of grease or debris. Lightly roughening the surfaces with sandpaper can improve adhesion. Apply a thin, even coat of Angelus Clear Shoe Cement to both surfaces. Allow the adhesive to dry until it is tacky to the touch (typically 5-15 minutes, depending on conditions). Press the surfaces together firmly, ensuring proper alignment. For sole repairs, apply pressure evenly across the entire bonded area.
Compatibility: This cement is designed for use on leather, rubber, plastic, vinyl, and fabrics. It is not recommended for use on materials not listed or on highly porous surfaces without testing in an inconspicuous area.
Care & Storage: Store the can in a cool, dry place away from heat, sparks, open flames, and direct sunlight due to its flammable nature. Keep the lid tightly closed when not in use to prevent drying. Clean up any excess uncured adhesive with a rag. Use in a well-ventilated area.
