Best current price£379.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£379.99Visit shop B&Q - Ebt411Bs 4-In-1 Brushed Steel Instant Boiling Hot Water Kitchen Tap
Visit shop2 offers from £379.99
View price history by clicking the chart icon.
The Liquida 4 In 1 Brushed Steel Kitchen Tap is designed for busy households seeking convenience and efficiency in their kitchen. It provides instant near-boiling hot water, filtered water, and standard hot/cold water from a single fixture, saving time and energy. A potential caveat is the need for adequate water pressure for optimal performance.
| Colour | Silver |
|---|---|
| Model Part Number | EBT411Bs |
| Brand | Liquida |
The temperature can be adjusted on the boiler tank itself. Refer to the installation manual for the specific location of the temperature control dial, typically ranging from 75 to 98 degrees Celsius.
The boiler tank has a capacity of 2.4 liters.
No, the filtered water dispensed is at ambient temperature, similar to standard cold water. Only the dedicated boiling water function provides heated water.
The tap requires an operating pressure between 1.5 and 5 bar. If your system pressure is lower than 1.5 bar, you may need to install a booster pump.
Filter replacement frequency depends on usage and water hardness, but typically every 6 months is recommended. Refer to the product manual for specific guidelines.
Please refer to the retailer or manufacturer's documentation for specific warranty details, as these can vary.
Check that the boiler tank is powered on and has reached temperature. Ensure the water supply to the tank is open. Verify that the water pressure meets the minimum requirement of 1.5 bar.
Adjust the temperature setting on the boiler tank to a higher degree (between 75-98°C). Ensure the tank is fully heated; allow 10-15 minutes after initial setup or if it has been off for a while.
This may indicate a need to service the internal valves or cartridges. Consult the user manual or contact customer support for assistance.
The filter may be clogged or nearing the end of its lifespan. Replace the filter cartridge according to the manufacturer's instructions.
Setup: The Liquida EBT411BG is designed for deck or sink mounting and connects to standard hot and cold water feeds. A separate line connects to the boiler tank for the instant boiling water. Professional installation is recommended to ensure all plumbing and electrical connections are made correctly and safely.
Compatibility: This tap operates effectively with a water pressure range of 1.5 to 5 bar. Ensure your home's water pressure meets this requirement.
Care: To maintain the brushed steel finish, clean the tap regularly with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, which can scratch the surface. For the internal components, refer to the manufacturer's manual for specific descaling or maintenance procedures, especially if you live in a hard water area.
