HEPA Filter for MEACO Dehumidifier - 20L 20LE Low Energy Platinum - White
Premium quality HEPA filters set for your Meaco 20L 20LE Dehumidifier or 2in1 Purifier. This pack ...Premium quality HEPA filters set for your Meaco 20L 20LE Dehumidifier or 2in1 Purifier. This pack contains 6 filters. These HEPA (High efficiency Particle Arrester) filters capture over 99% of particles that have a size of 0.3µm or larger, making them essential for allergy sufferers sensitive to dust, mould spores, pollen, and pet dander. Please inspect your original filter measurements to ensure a match before purchase, as this filter will NOT fit the 'ARETE' series 20L machines which require a larger filter. The filters feature a handy pull-tag for easy removal and installation. Filter dimensions are: Height: 260mm, Width: 190mm, Depth: 10mm. It is recommended to change the filter when its color changes from white to grey/dark grey, typically every 1 month for heavy use, 3 months for normal use, and 6 months for light use. The brand is SPARES2GO.
Spares2go Hepa Filters For Meaco Dehumidifier 20L 20Le Low Energy Platinum X 6Free delivery in 1–3 days£30.99Visit shop →
Product Information
Full details
This guide provides essential information for users of the SPARES2GO HEPA Filter designed for Meaco 20L 20LE Low Energy Platinum Dehumidifiers. This filter effectively captures over 99% of particles as small as 0.3µm, making it ideal for allergy sufferers. Note that this filter is *not* compatible with the 'ARETE' series 20L machines, which require a different filter size. This guide will help you understand the filter's features, how to use it, and how to maintain it for optimal performance.
All features
Colour
White
Model Part Number
20L 20LE Low Energy Platinum
Brand
SPARES2GO
Extended Product Information
FAQs
How often should I replace the filter?
Replace the filter every 1-6 months depending on usage. Check for color change to determine the need for replacement.
How do I know if the filter needs replacing?
The filter should be replaced when its color changes from white to grey/dark grey.
Where is the filter located in the dehumidifier?
The filter is located inside the dehumidifier, usually behind a removable panel. Refer to your dehumidifier's manual for specific instructions.
Can I wash the filter to reuse it?
No, this HEPA filter is not washable. It needs to be replaced when it's dirty.
What happens if I use the wrong filter?
Using an incompatible filter can reduce the dehumidifier's efficiency and may not provide adequate air filtration.
What is the filter made of?
This filter is made of HEPA (High Efficiency Particulate Air) material.
Troubleshooting
Dehumidifier performance seems reduced.
Check the filter; it may be clogged. Replace the filter if it has changed color.
Allergy symptoms persist despite use.
Ensure the filter is properly installed and compatible. Check other potential allergy sources in the environment.
Pros and Cons
Pros
Highly effective at removing allergens and pollutants.
Easy to install and replace.
Specifically designed for a perfect fit in compatible Meaco dehumidifiers.
Helps extend the life and efficiency of your dehumidifier.
Cons
Requires periodic replacement.
Not compatible with all Meaco 20L series dehumidifiers (e.g., ARETE series).
Performance depends on correct installation and regular maintenance.
Setup, Compatibility & Care
Compatibility Check: Ensure your dehumidifier model is 20L 20LE Low Energy Platinum. *This filter is not compatible with the 'ARETE' series.*
Installation: Open the dehumidifier to access the filter compartment. Remove any old filter and insert the new SPARES2GO HEPA filter. Make sure the filter is properly seated.
Filter Dimensions: Height: 260mm, Width: 190mm, Depth: 10mm. Ensure these dimensions match your existing filter before installation.
Care: Regularly inspect the filter. Replace it when its color changes from white to grey/dark grey. The frequency depends on use: