Bodylite Gear LED Slapband - Pink

The built-in 120mAh lithium-ion battery lasts up to 7 hours on a full charge, depending on the mode used (flashing mode typically uses less power).

You can recharge the band using the included USB cable. Connect it to a standard USB power source like a computer or a USB wall adapter. A full charge takes approximately 1.5 to 2 hours.

The band is made of nylon and is designed for use in various conditions, but the electronic components are not fully waterproof. Avoid submerging the band in water. Clean with a damp cloth.

While specific operating temperatures are not listed, it is generally recommended to use the band in moderate weather conditions. Extreme temperatures may affect battery performance.

Yes, the band is lightweight, comfortable, and designed for all ages. Its primary function is to increase visibility, making it a good safety accessory for children during outdoor activities in low light.

The LED slapband features three modes: Constant Glow, Flashing, and Off. These can be cycled through by pressing the single button on the band.

The band measures 4cm in width and 35cm in length, designed to be a universal fit for most wrists, arms, and ankles.

Ensure the band is charged. Connect the USB cable and check if the charging indicator lights up. If it still doesn't light up after charging, contact customer support.

Ensure the band is straightened fully before attempting to slap it onto a limb or object. Sometimes a slight flick of the wrist can help it secure properly.

Press the button once to turn the band on to flashing mode. Press and hold the button for a few seconds, or repeatedly press until the constant glow mode is activated (refer to specific model instructions if available).

Ensure the band is fully charged before first use (1.5-2 hours). Use the constant glow mode sparingly, as flashing mode generally consumes less power. If battery life is significantly less than 7 hours after multiple charges, contact support.