Adept Press To Copper Transition Fittings - 25mm X 22mm - Pack Of 10

Press Transition to Copper is designed to provide a secure and reliable connection between multila...

Best current price£20.50from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£20.50Visit shop

B&Q - Press To Copper Transition Fittings Mlcp Wras Approved16mm X 15mmPack Of 10

Visit shop

All Offers

6 offers from £20.50 - £96.40

View price history by clicking the chart icon.

B&QB&Q - Press To Copper Transition Fittings Mlcp Wras Approved16mm X 15mmPack Of 10

Free delivery in 1–3 days

£20.50

Visit shop

Product Information

Full details

This guide is for plumbers and installers working with potable water and heating systems. The Adept Press to Copper Transition Fitting offers a secure and fast way to connect multilayer composite pipe (MLCP) to copper pipe using press-fit technology, eliminating the need for traditional joining methods like soldering. While it provides a reliable, leak-free connection, it requires specialized press tools for installation.

All features

Model Part Number	PS25X22CU-T_10-PACK
Brand	Adept Technology

Extended Product Information

FAQs

What type of pipe does this fitting connect?

This fitting is designed to connect Multilayer Composite Pipe (MLCP) to standard copper pipe.

Do I need to solder or use glue with this fitting?

No, this fitting uses a press-fit connection system and does not require soldering, adhesives, or compression fittings.

What tools are required for installation?

You will need a compatible press tool with the correct jaw size for the specific fitting and pipe dimensions you are using.

Is this fitting approved for drinking water systems?

Yes, the Adept Press to Copper Transition Fittings are WRAS Approved, making them suitable for potable water and heating systems.

Can these fittings be used for gas lines?

No, these fittings are specifically designed and approved for potable water and heating systems only.

How many fittings are included in a pack?

These fittings are supplied in a pack of 10.

What are the available sizes?

The fittings are available in multiple size options to accommodate different MLCP and copper pipe diameters, such as 16mm x 15mm, 20mm x 15mm, 20mm x 22mm, 25mm x 22mm, and 32mm x 28mm.

Troubleshooting

Fitting does not press correctly

Ensure the correct jaw size is used for the fitting and pipe. Verify the pipe is fully inserted to the correct depth and that the press tool is fully actuated. Check the press tool for proper operation.

Leak detected after installation

The most common cause is an incomplete or improper press. The fitting may need to be cut out and replaced. Ensure pipes were clean, deburred, and inserted to the correct depth before pressing.

Difficulty inserting pipe

Check if the pipe ends are properly deburred and if the pipe is square. Ensure the correct pipe size is being used for the fitting.

Press tool not engaging

Confirm the battery is charged (if applicable) and the tool is functioning correctly. Ensure the jaws are properly seated on the fitting.

Pros and Cons

Pros

Significantly reduces installation time compared to traditional methods.
Provides a highly reliable and leak-free joint when installed correctly.
Eliminates fire hazards associated with soldering.
Durable construction ensures long-term performance.
WRAS approval confirms suitability for critical water and heating applications.
Offers a professional and clean finish.

Cons

Requires specific press tools for installation.
Higher initial cost per fitting compared to some traditional fittings.
Not suitable for all types of pipe systems; specific compatibility needed.
Repairs may require cutting and replacing the fitting.
Requires accurate pipe insertion depth for a secure seal.

Setup, Compatibility & Care

Setup:

Ensure both the MLCP and copper pipes are cut square and deburred.
Mark the correct insertion depth on both pipe ends according to the manufacturer's specifications.
Slide the fitting onto the MLCP pipe.
Insert the copper pipe into the other end of the fitting.
Using the appropriate press tool and jaw size for the fitting and pipe dimensions, execute the press cycle.
Verify the press indicator or perform a visual check to confirm the press is complete.

Compatibility:

Designed specifically for transitioning between Multilayer Composite Pipe (MLCP) and copper pipe.
Compatible with standard MLCP systems and copper pipe sizes as indicated by the fitting's dimensions (e.g., 25mm MLCP to 22mm Copper).
Requires compatible press tools (e.g., Ridgid, Milwaukee, Rothenberger) with the correct jaw size.

Care:

These fittings are designed for permanent installation and require no routine maintenance.
Keep fittings clean and dry during storage prior to installation.
Avoid exposing fittings to corrosive substances or extreme environmental conditions before installation.