Heat Resistant Paint - White - 400ml

MOTIP Heat Resistant Paint is suitable for use on metal surfaces that are exposed to high temperatures, such as exhaust systems and engine parts.

The surface should be clean, dry, and free from rust, grease, and old paint. Use a wire brush or sandpaper to remove any loose particles.

Apply multiple thin coats for best results. Allow each coat to dry completely before applying the next.

This paint can withstand temperatures up to 800°C.

No, priming is generally not required, but proper surface preparation is essential for optimal results.

Drying times vary. Refer to the product instructions for specific drying times and curing recommendations.

This paint is designed for metal surfaces. It is not recommended for use on plastic.

Clean the painted surface with a mild detergent and water. Avoid using abrasive cleaners or solvents.

Ensure the surface was properly prepared before application. Remove loose paint and reapply following the correct application procedure.

Ensure the paint has fully cured according to the manufacturer's instructions. Overheating the surface before full cure may cause damage.

Shake the can well before each use and apply thin, even coats to achieve a uniform finish.