Best current price£24.16from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£24.16Visit shop Bristan Bath Tap Head Or Reviver With Acrylic Handles R075a
Visit shop
B&Q£34.18Visit shop B&Q - R 3/4 Ac Bath Tap Reviver Acrylic Handles Bath Pillar Taps Pair 3/4"
Visit shop6 offers from £24.16 - £74.28
View price history by clicking the chart icon.
This Bristan Bath Tap Reviver with Acrylic Handles in Silver is designed for homeowners looking to refresh their existing bath taps without a full replacement. Its key benefit is providing a cost-effective and straightforward way to update worn-out handles and valves, giving your bath tap a new lease on life. A potential caveat is the need to verify compatibility with your specific tap model before purchase. This kit includes a pair of acrylic handles, standard valves, and various spacers and washers to ensure a good fit across a range of Bristan 1/2" and 3/4" models.
| Colour | Silver |
|---|---|
| Model Part Number | R 3/4 AC |
| Brand | Bristan |
The kit typically includes a pair of acrylic handles, standard valve mechanisms, and a selection of spacers and washers to ensure compatibility with various tap designs.
It is suitable for most Bristan 1/2" 5412, 3/4" 5412, and 3/4" 1010 bath taps. Always confirm compatibility with your specific model.
While the spacers offer some adjustability, this reviver is designed specifically for compatible Bristan models. Use on other brands is not recommended and may lead to improper fit or leaks.
The reviver is designed to work with water pressures between 0.2 bar and 5.0 bar.
Bristan products typically come with a guarantee. Please refer to the product packaging or Bristan's official website for the specific guarantee duration for this item.
Basic plumbing tools such as a screwdriver, possibly an adjustable wrench, and a cloth should be sufficient for installation. Ensure the main water supply is turned off before starting.
Ensure all components are fitted correctly and tightened appropriately. Check that the correct spacer and washer are in place for your tap's specific requirements. If the issue persists, it might indicate a problem with the tap body itself.
Ensure the valve is correctly seated and tightened. Check if the correct washer and spacer combination was used for your tap's seating depth. If dripping persists, the tap body itself may be damaged or corroded and might require replacement.
Verify that the handle screw is not overtightened. Ensure no debris is obstructing the valve mechanism. The valve itself may be faulty, in which case a replacement valve would be needed.
Check that the valve is properly seated and that the handle is securely fastened. Inspect the O-ring or seal at the top of the valve body for damage and replace if necessary.
Double-check the compatibility list against your tap model. Ensure you have used the correct combination of spacers and washers provided in the kit. If incompatibility is confirmed, this specific reviver may not be suitable for your tap.
Compatibility: Before purchasing, verify that your Bristan tap is compatible. This reviver is suitable for most 1/2" 5412, 3/4" 5412, and 3/4" 1010 models. Check your existing tap for model numbers or consult the Bristan website.
Setup:
Care: Clean the acrylic handles and chrome parts with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can scratch the finish. For internal components, regular checks for leaks are recommended.
