Buster + Punch Fan Switch - Brass
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide helps you understand and effectively use the Buster + Punch Fan Switch - Brass. Designed for indoor use, this switch provides a stylish and functional solution for controlling your fan. Note that it requires a specific back box for installation and is intended for use with 230v-240v AC systems.
All features
| Model Part Number | Fan Switch |
|---|---|
| Brand | Buster + Punch |
Extended Product Information
FAQs
What is the amperage rating of the switch?
The switch has a 10 Amp rating.
What type of electrical system is this switch compatible with?
It is compatible with 230v - 240v AC systems.
Can this switch be used outdoors?
No, it is IP20 rated and designed for indoor use only.
What size back box do I need?
You need a 70mm x 70mm back box with a 37mm recess depth.
How do I clean the switch?
Clean with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
Is the switch earthed?
Yes, it is Class 1, earthed.
Does this switch come with screws?
Yes, the switch features signature, solid brass, coin screws.
Can I use this switch for a cooker?
No, this is a fan switch. You need a cooker switch for your cooker.
Troubleshooting
Fan not turning on
Check the wiring connections at the switch and the fan. Ensure the circuit breaker is not tripped.
Switch feels warm
Ensure the fan's load does not exceed the switch's 10A rating. If it does, replace the switch with one that has a higher rating.
Switch does not fit in the back box
Verify that you are using a 70mm x 70mm back box with a 37mm recess depth. If the back box is the wrong size, replace it with the correct one.
Pros and Cons
Pros
- Stylish solid brass design.
- Durable and long-lasting construction.
- Easy to install (with the correct back box).
- Provides a safe and reliable fan control solution.
- Complements other Buster + Punch switches and sockets.
Cons
- Requires a 70mm x 70mm back box with 37mm recess depth for installation.
- Indoor use only.
- May require professional installation depending on your electrical knowledge.
- Limited to 10 Amp, so check fan specifications.
Setup, Compatibility & Care
Setup:
- Ensure the power supply to the circuit is turned OFF.
- You will need a 70mm x 70mm back box with a 37mm recess depth.
- Follow standard electrical wiring practices to connect the switch.
- Consult a qualified electrician if you are unsure.
Compatibility:
- Designed for use with 230v - 240v AC systems.
- Compatible with a wide range of indoor fans.
- Ensure your fan's amperage draw does not exceed 10 Amps.
Care:
- Clean with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents.
- Do not immerse in water.