Best current price£5.50from eBay
Shopping.co.uk recommended and popular offers
eBay£5.50Visit shop Tamiya 87238 Low Odour Model Cement (40ml)
Visit shop
B&Q£10.00Visit shop B&Q - Low Odour Liquid Cement 40Ml
Visit shop12 offers from £5.50 - £13.19
View price history by clicking the chart icon.
This Tamiya Low Odour Cement is designed for hobbyists working in shared or sensitive environments, offering a strong bond with minimal fumes. While it excels in providing a user-friendly, less flammable option for styrene and ABS plastics, users should be aware that its water-based nature may require longer drying times compared to traditional solvent-based cements. It features a convenient built-in brush for precise application.
| Model Part Number | 87238 |
|---|---|
| Brand | Tamiya |
This cement is specifically formulated for styrene and ABS plastics, which are commonly used in scale model kits.
The low odour formulation means you can use the cement indoors with significantly less smell and fewer fumes compared to traditional solvent-based plastic cements, making it ideal for shared spaces or sensitive environments.
While it is less flammable and has lower odour than solvent-based cements, it is still a chemical adhesive. Always use in a well-ventilated area, keep out of reach of children and pets, and follow all safety precautions.
Drying and curing times can vary based on application thickness, humidity, and temperature. Generally, allow several hours for a full cure. Initial handling strength is usually achieved within 30-60 minutes.
This cement is best for creating strong bonds between two fitting pieces of plastic. For filling larger gaps, you might consider using a dedicated putty or filler product after the main assembly is complete.
The brush can be cleaned with water immediately after use. If the adhesive dries, try to gently remove it. Ensure the cap is sealed tightly to prevent the brush from drying out.
When stored correctly (upright, cool, dry, sealed), Tamiya adhesives typically have a shelf life of 2-3 years. However, performance may degrade over time.
Ensure both plastic surfaces are clean, dry, and free from dust or grease. Apply a thin, even layer of cement to both surfaces before joining. Allow adequate drying time.
Gently clean the brush with water immediately after use. If the adhesive has dried, try to soften it with a damp cloth or by soaking the brush tip briefly in water. Ensure the cap is sealed tightly when not in use.
This cement is designed to gently soften plastic for bonding. If excessive melting occurs, you may be applying too much adhesive or the plastic type might be more sensitive. Use a lighter application and ensure sufficient ventilation.
Ensure the cap is properly sealed after each use. If it becomes stuck, try gently warming the cap area with your hands or a warm, damp cloth. Avoid using excessive force.
Setup: No setup is required. Simply unscrew the cap, which contains the applicator brush, and apply the cement directly to the surfaces to be joined. Ensure both surfaces are clean and dry for optimal adhesion.
Compatibility: This cement is specifically designed for styrene and ABS plastics. It is not recommended for use on other plastic types, painted surfaces, or materials other than plastic.
Care: Store the bottle upright in a cool, dry place, away from direct sunlight and heat sources. Ensure the cap is securely closed after each use to prevent the adhesive from drying out. Clean the brush with water if it becomes clogged with dried adhesive, but do this promptly after use.
