Hycote Colour Touch Up Brush Paint - Black - 12.5ml

Clean the area thoroughly with a degreaser or soap and water, then dry it completely. Remove any loose paint flakes. For best adhesion, lightly abrading the surface can be beneficial.

Apply thin, even coats. Usually, two to three thin coats are sufficient. Allow each coat to dry for at least 15-30 minutes before applying the next. Avoid applying thick coats, as this can lead to runs and an uneven finish.

Yes, the Hycote Colour Touch Up Brush Paint is suitable for use on plastics as well as metals, wood, and ceramics.

When stored correctly in a cool, dry place with the cap tightly sealed, the paint typically maintains its quality for several years. However, it's best to use it within 1-2 years of purchase for optimal performance.

The paint is fast-drying. It is usually touch-dry within 15-30 minutes, with full hardening occurring over a longer period.

This touch-up paint is designed to be a direct match and repair. While compatible with OEM finishes, for best results and longevity, it's recommended to apply it directly to the base colour or primer in the damaged area.

Ensure the can is shaken vigorously for at least two minutes. Check if the brush is clogged and clean it if necessary. If the nozzle is blocked, try clearing it with a solvent and a fine needle.

Apply in thin, even coats rather than one thick layer. Allow each coat to become touch-dry before applying the next. For best results, practice on a scrap surface first.

Verify you have selected the correct colour code for your vehicle. Ensure the paint has been thoroughly mixed. Note that variations in the original paint's age and condition can affect the final match.

The surface may not have been adequately prepared. Ensure the area is completely clean, dry, and free from contaminants like oil or wax. Lightly sanding the area before application can improve adhesion.