Facom Power Bar - 1/2in Drive
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Facom Power Bar is designed for mechanics and DIY enthusiasts needing extra leverage to loosen stubborn nuts and bolts. Its key benefit is the durable, hinged head that provides consistent torque application and maintains position, though the non-slip handle, while comfortable, may wear over extended heavy use. This 1/2in drive breaker bar offers enhanced durability with a stiffened hinge and a secure 180° head, finished with a corrosion-resistant chrome coating.
All features
| Model Part Number | S.141a |
|---|---|
| Brand | Facom |
Extended Product Information
FAQs
What is the primary purpose of the Facom Power Bar?
The Facom Power Bar is designed to provide increased leverage for loosening tight or seized nuts and bolts, particularly in situations where a standard ratchet does not offer enough torque.
What size sockets are compatible with this breaker bar?
This power bar is specifically designed for use with 1/2in drive sockets.
How does the hinged head benefit the user?
The hinged head allows for greater flexibility in angling the bar to access fasteners in confined spaces and can be secured at 180° to maintain a consistent position during torque application.
Is the handle comfortable for extended use?
Yes, the power bar features a non-slip PVC handle designed for comfort and to ensure a secure grip, reducing hand fatigue during prolonged use.
What maintenance is recommended for this tool?
It is recommended to wipe the tool clean after each use, especially the hinged head, and apply a light lubricant periodically to prevent rust and ensure smooth operation. Store in a dry environment.
What are the dimensions and weight of the Facom Power Bar?
The overall length is 381mm, and the weight is 595g.
Does this tool meet industry standards?
Yes, it complies with NF ISO 3315, ISO 3315, DIN 3122, and ASME B107.10 standards.
Troubleshooting
Hinged head feels stiff or does not lock securely.
Inspect the hinge for debris. Clean thoroughly and apply a light lubricant. If the issue persists, the hinge mechanism may be damaged and require professional inspection or replacement.
Handle grip feels slippery or worn.
Clean the PVC handle with soap and water, then dry completely. If the PVC is significantly worn or damaged, consider replacing the handle if possible, or use work gloves for improved grip.
Reduced leverage or difficulty breaking loose fasteners.
Ensure you are using the correct size socket and that it is fully engaged with the fastener. Check that the breaker bar head is securely locked in the desired position. Verify the fastener is not cross-threaded or otherwise compromised.
Chrome finish shows signs of rust or corrosion.
Clean the affected area with a soft cloth and a mild metal polish. Apply a thin layer of protective oil to the entire surface, especially the hinge, and store in a dry place.
Pros and Cons
Pros
- Excellent leverage for loosening tight fasteners.
- Durable construction with a reinforced hinge.
- Securely locking head provides consistent positioning.
- Comfortable non-slip grip reduces user fatigue.
- Corrosion-resistant chrome finish for longevity.
Cons
- The PVC handle may show wear over time with aggressive use.
- Limited to 1/2in drive sockets, requiring adapters for other sizes.
- The hinge, while stiffened, is a potential point of failure under extreme torque.
- Fixed length may not be sufficient for all ultra-tight access scenarios.
- Heavier than standard breaker bars due to reinforced construction.
Setup, Compatibility & Care
Setup: The Facom Power Bar requires no specific setup. It is ready for immediate use with any standard 1/2in drive socket. Ensure the socket is fully seated onto the drive end and the fastener head before applying force.
Compatibility: This tool is designed for use with all 1/2in drive sockets. Ensure the socket size matches the fastener being worked on. Adapters can be used to connect to other drive sizes, but this may reduce leverage and increase the risk of tool damage.
Care: After use, wipe the power bar clean with a dry cloth to remove dirt and grease. For best results, apply a light coat of oil to the hinged head periodically to prevent rust and ensure smooth operation. Store in a dry environment. Avoid using excessive force that could exceed the tool's rated capacity or damage the hinge.