Varilight Fan Isolator Switch - Screwless - Brushed Bronze
This Varilight Screwless Fan Isolating Switch features a Brushed Bronze finish with a Black Insert...This Varilight Screwless Fan Isolating Switch features a Brushed Bronze finish with a Black Insert. It operates at 220/250V AC with a maximum load and current rating of 10A. The switch has triple pole switching and a wide rocker for easy operation. It comes with a sleek, low-profile screwless faceplate. Dimensions: 86x86x23mm. Faceplate Depth: 4mm. Fixing Centres: 60.3mm. Recommended Back Box Depth: 35mm. Terminal capacities: 3 x 1.5mm_ for both Live and Earth.
This Varilight Screwless Fan Isolating Switch is designed for electricians and homeowners needing a safe and compliant way to isolate ventilation fans during maintenance. Its key benefit is providing secure, triple-pole switching in an aesthetically pleasing screwless design. A potential consideration is the need for a specific back box depth for installation.
All features
Model Part Number
XDYFIBS.BZ
Brand
Varilight
Extended Product Information
FAQs
What is the maximum current rating for this switch?
The switch has a maximum current rating of 10A.
What voltage does this switch support?
It supports standard 220/250V AC voltage.
Does the switch come with a back box?
No, a separate back box is required. A minimum depth of 35mm is recommended.
How do I clean the switch?
Wipe the switch with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive materials.
What does 'Triple Pole Switching' mean?
Triple pole switching means that both the live and neutral conductors of the circuit are disconnected when the switch is operated, providing a safer isolation point.
Can this switch be used for lights?
This switch is specifically designed as a fan isolator and is not intended or rated for general lighting circuits.
What are the dimensions of the switch plate?
The faceplate dimensions are 86x86mm with a depth of 4mm.
Troubleshooting
Switch not operating fan
Verify power is restored to the circuit. Check all wire connections to the switch terminals are secure and correctly placed. Ensure the fan itself is functioning and correctly wired.
Loose faceplate
Gently press the faceplate back onto the switch module until it securely clicks into place. Ensure no debris is obstructing the connection.
Switch feels stiff
Ensure the back box is not obstructing the switch mechanism. Check wiring is not trapped behind the switch module. If the issue persists, the unit may be faulty.
Pros and Cons
Pros
Modern and sleek screwless aesthetic.
Durable Brushed Bronze finish.
Triple pole switching for full circuit isolation and safety.
Easy to operate wide rocker switch.
Complies with electrical standards for fan isolation.
Cons
Requires a specific minimum back box depth (35mm).
Specific finish may not suit all decors.
Primarily designed for fan isolation, not general purpose switching.
Setup, Compatibility & Care
Setup:
Ensure the power supply to the circuit is switched off at the mains.
Use a standard 1-gang back box with a minimum depth of 35mm.
Connect the fan's live and neutral wires to the appropriate terminals on the switch.
Secure the switch to the back box using the provided fixing screws.
Attach the screwless faceplate by gently pushing it onto the switch module until it clicks into place.
Compatibility:
Operates on standard 220/250V AC electrical systems.
Suitable for isolating single-phase ventilation fans with a load not exceeding 10A.
Terminal capacities are designed for 1.5mm² wires.
Care:
Wipe clean with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
Ensure the switch remains dry.
Periodically check for any signs of damage and cease use if found.